thermite or no thermite? – the saga of the red-gray chips
the controversial red-gray chips found in the dust from the destroyed WTC towers. Are they thermite? or just primer paint?
In 2006 a physics professor from BYU, Steve Jones, made a public appeal for samples of dust from the destroyed WTC towers. As a result he received several such samples, which are all detailed in Harrit et al below. On examination of the samples Jones claims to have noticed small iron spheres and tiny chips, red on one side, grey on the other. For obvious reasons these latter became known as the “red-gray chips,” and they would end up generating considerable controversy.
This is our first look at the complex imbroglio that is the saga of these “red-gray chips”. We’re initially setting out a brief summary of the principle sources of information – viz the Harrit et al paper, the Millette study and Harrit’s rebuttal of the primer paint suggestion. We’re uploading copies of these documents here and making them available for interested readers to do their own study. Just click on the inks below to download the PDFs.
So, the major documents in the case are as follows:
1: Harrit et al(2009): Active Thermitic Material Discovered in Dust from the 9/11 World Trade Center Catastrophe
Allegedly peer-reviewed (some have queried this), and published by the Open Physics Journal, this paper was authored by three BYU physicists (including Jones, the original finder of the chips), a professor of chemistry, and others. It claimed that the tiny “red-gray chips” found in abundance in the dust from the WTC collapses exhibited inexplicably high energy and other indications that pointed to them being unignited “thermitic material.”
Thermite in its broadest sense is a mix of iron and a “fuel” (often aluminium) that creates a powerful pyrotechnic used for such things as welding and in various other military and civilian capacities. The question of its historical use in controlled demolition has become controversial, mostly as a result of this paper. Linear thermite charges are available for use in controlled demolition, and thermite has apparently been used in the demolition of other buildings such as the Skyride Tower in Chicago in 1936.
Whether one accepts its use in modern controlled demolition or not, however, thermite is profoundly not a substance that ought to be present in normal building material. So, if its presence in the WTC dust can be established, this would be an overwhelming case for additional and intentional foul play on 9/11 over and above the hijacking and crashing of the planes.
Harrit et al went further and claimed the fine-mixing of the elements in the red-gray chips was consistent with “nano-thermite fabricated at the Lawrence Livermore National Laboratory and elsewhere.”
2: Millette(2012): Progress Report on the Analysis of Red/Gray Chips in WTC Dust
This study was commissioned by Chris Mohr, a self-confessed non-scientist and proponent of what he called the “natural collapse” theory. Mohr commissioned EPA scientist James Millette to reproduce the experiments done by Harrit et al. Millette in his capacity with the EPA, had previously been engaged in analysing samples of the WTC dust in connection with public health issues. Given this background some have questioned his impartiality and suitability for Mohr’s study. Harrit et al refused to give Millete samples of their own red-gray chips, so there is some controversy over whether the red-gray chips examined by Millette were really identical to those examined by Harrit et al. These problems have never been resolved.
Mohr claimed in 2012 that the Millette study would soon be “published in a peer-reviewed journal”, but to date this has not happened, and all we have are the “progress reports” issued by Millette in 2012. Mohr also released a video backing up the Millette study, but that video has now been taken down or made private.
Millette’s initial but unpublished findings were that the red-gray chips were “consistent” with primer paint (the WTC primer paint used on the steel girders was indeed red), and showed no evidence of being thermite or even energetic.
Millette’s failure to publish as promised has raised obvious questions about his faith in his own conclusions.
It probably should also be said that the EPA ’s work on the safety of the WTC dust – unconnected with the thermite question, but with which Millette was associated – has been the subject of allegations of fraud by Cate Jenkins. We must emphasise that no such allegations have been made in connection with his work on the red-gray chips however.
3: Harrit(2009): Why the Red/Gray Chips Are Not Primer Paint
This was produced by Harrit in 2009, and not as a rebuttal to Millette. It was not published in a journal to our knowledge. In it Harrit claims the primer paint was identified in the NIST report and its known chemical composition is markedly different from that of the red portions of the red-gray chips. He also claims the primer paint is thermally much more stable than the red-gray chip and – unlike the chips – shows no tendency to ignite fiercely at 430c.
* * *
These are the main sources of we know about in connection with the red-gray chips and the thermite question. If we have missed anything important please let us know. We’ll be looking at some of these claims and the background to them more closely in future articles.
SUPPORT OFFGUARDIAN
If you enjoy OffG's content, please help us make our monthly fund-raising goal and keep the site alive.
For other ways to donate, including direct-transfer bank details click HERE.
@Oystein
If the case for the red gray chips being primer paint is so strong why didn’t Millette publish his findings in a peer-reviewed journal as he said he would in 2012? Why has no one else ever published a definitive paper proving the case?
I am not Millette’s keeper, and have never spoken to him directly, so I can’t give you a definitive answer. At the time, his main occupation was running a lab as general manager, and he had other, money-making projects and customers. So I guess this issue fell deep down low on his list of priorities. In the meantime, I hear he has retired – don’t know what his interests and priorities are nowadays. Perhaps you think that this issue is important? It isn’t. Harrit et al was published in an obscure vanity journal with zero adademic impact. It’s results are believed only by a tiny, fringe of society, within which only a tiny percentage is from relevant science disciplines or professions. This is not making waves in the forensic community! Besides, what would a journal publication change? Would you accept that he refuted Harrit et al? Would Harrit et al… Read more »
Oh Ok, I get it. Chris Mohr paid Millette to try and refute the Harrrit et al paper – because it wasn’t important.
Millette worked on doing just that for over a year – because it wasn’t important
Chris Mohr promised a high profile article in a peer-reviewed journal – because it wasn’t important
And they both totally failed to deliver on all promises, not because they couldn’t prove the red gray chips were primer paint, oh God no – they just kinda lost interest because it was all so unimportant.
It’s almost funny. It kind of reminds me of an Aesop fable, something about a fox and sour grapes.
If only it really wasn’t so important, however, that traces of nano-energetic particles have been found in the WTC dust . . .
What’s wrong with Mr. Oystein’s mode of argumentation, anyway? I will state it as simply as I can: Mr. Oystein looks at one spectra presented in the form of a graph produced by one XEDS sample, and he compares that with another. If the graphs are radically different, he concludes form the difference between the graphs that they cannot be of the same red-grey chip or even of the same material composite because otherwise they would be similar or very close to identical. This is wrong. Each red-grey chip is an amalgam of various molecules and elements, and these are not distributed at every point in the exact ratios throughout the red-grey chip. Here, in one tiny area of the red-grey chip, you will find a lot of iron-oxide, but maybe little to no aluminium, so far as one XEDS sampling goes; there, you will find a lot of elemental… Read more »
Haha OMG you are a hoot 😀 If what you say were true – that XEDS doesn’t give strong hints to tell whether two specimens are the same or different materials – then using this method to identify the material that a specimen is made from would be useless and incompetent. Of course not even Harrut et al were THAT incompetent. Only you are. It is rather obvious that they scanned a larger portion of the respective surfaces for Figures 7 (chips a-d) and 14 (the MEK chip). This is implied when they explain: For chip a: “a focused electron beam was placed directly onto the different particles, and the XEDS data were collected. By placing the beam on a cluster of plate-like particles, the spectrum in Fig. (11a) was generated. The spectrum in Fig. (11b) was acquired from a cluster of the smaller bright faceted grains.” (page 12/15) For… Read more »
“Haha, OMG.”
Yes, that is pretty much the only reply that you can muster in defense of your mistaken assumption. However, no amount of condescension or sneering changes the fact that neither you nor anyone can deduce whether one or two very different physical objects comprise the source from which two widely different XEDS spectra have been generated. Yet your entire line of reasoning hinges on this assumption, precisely and exactly as you once again recapitulate it even here as a rebuttal to a clear and succinct invalidation of the pivotal assumption on which your entire line of reasoning hinges. But I am the one talking over my head. Yes, of course.
🙂 Since everyone can see that I did not JUST reply with the laughter, but padded my sneer with arguments which, once more, you failed to quote and then properly address, I am sure any honest and intelligent reader can and will make up their mind as to who is out of his league here. Tell me, have you ever looked at XEDS charts before? Do you know what they plot on the x- and y-axis, without looking it up? Do you at least know what it is that XEDS measures? How would you figure out what element a peak would be associated with if it weren’t already labeled by someone else or the software? We all know of course that your HONEST answer would have to be “have no idea”. And that would be all anyone would need to assess whether or not you are talking out of your… Read more »
Please. Are you arguing that if I scan a red-grey chip at location A and then scan at location B, at a given intensity, I am guaranteed to have two highly similar XEDS graphs?
No. Strawman. Remember I asked you not to erect strawmen, Why did you, once more? I am arguing that you have no fucking clue about XEDS, as evidenced by your not answering my questions – without looking up the answers: 1. Tell me, have you ever looked at XEDS charts before? 2. Do you know what they plot on the x- and y-axis, without looking it up? 3. Do you at least know what it is that XEDS measures? 4. How would you figure out what element a peak would be associated with if it weren’t already labeled by someone else or the software? But don’t be sad, you are in good company: Harrit certainly had little to no experience with it when he “lead-authored” the paper, and I know David Griscom, the peer-reviewer, had no own experience and only a vague idea about it. Jones was new to it.… Read more »
You don’t want to get into “straw man” bullshit. I say to you that I have refuted your line of reasoning. What is your primary claim? It is this: by looking at two different XEDS graphs, you are able to tell us whether the graphs are of one sample or from two different samples, of one type of composite or of two different types of composites. I say that you can’t if all you are basing yourself on are the graphs as such. You, not I, brought up the glaring differences between the XEDS graphs in the Harrit et al. study, as if this were pivotal to your argument. I say that if this is what you did — and that is what you did — you have based your entire case on your misunderstanding of the purpose being served by the particular XEDS graphs being presented by Harrit et… Read more »
“I say that you can’t if all you are basing yourself on are the graphs as such.” This is not true – you essentially don’t grasp how XEDS is done. If you were correct, then Harrit’s not finding Zn or Mg in the XEDS of chip a (Fig 7a in the Harrit et al paper) wouldn’t even prove that the chip isn’t Tnemec, because you would have to argue that perhaps that particular graph was from a small spot where there was no Zinc Chromate pigment and no grain of talc – and YOU would have debunked Harrit’s stupid whitepaper! Alas, your hero Harrit seems to think (and he is correct!!) that that XEDS graph is representative of the elemental composition of chip a’s red material. And the same is true for Fig 14, the XEDS of the MEK chip: This is from scanning a larger area of that chip,… Read more »
You will not answer the simple question at the end of my comment, will you?
Are you not going to answer my questions? I asked first 😉 The answer to yours is: It depends. On how large the “location” is, and on the properties of the material scanned. And this depends on the competence of the operator, and what he knows about the material e.g. from electron microscopy images (e.g. SE or BSE) on an appropriate scale. Fig. 7 was done by a competent operator, Jeff Farrer. He did the same thing for the freshly-cut red surfaces of four different chips, and yes, they turned out highly similar, indicating that YES, you are “guaranteed” (very likely) to get the “identical” (similar) XEDS graph from two locations A and B of the same material if you know the fuck how to operate your stuff. If all XEDS readings were all over the place all of the time, then obviously, the whole method would be next to… Read more »
The answer to my question is, in your words, “It depends.” Translating that into the terms which framed my original question, we get something like this: there is no guarantee that two highly similar (or to all intents and purposes, ‘identical’) XEDS graphs will be obtained from a single red-grey chip, or from a single batch of such chips even if the chips are to all intents and purposes similar or “indentical.” Consequently, you cannot look at two XEDS graphs, taking nothing else into account, and confidently assert that if they are different, they are linked to two entirely different sample species. Now to become tediously repetitive, but in the interest of driving the point home: Therefore, that the XEDS graph of figure 14 in the Harrit et al. paper is different from the XEDS graphs ((a) throug (d)) of figure 7 in the same paper, that can in no… Read more »
On the off-chance that anyone might want to get a handle on the Harrit et al. position relative to that of “Oystein’s,’ some interesting pieces, I thought, can be found here: http://911debunkers.blogspot.ca/search?q=oystein You may also want to keep this in mind: “Magnesium was never observed, which is another element characteristic of the primer paint (Table 1).” Niels Harrit, “WHY THE RED/GRAY CHIPS ARE NOT PRIMER PAINT,” p.6. https://offgraun.files.wordpress.com/2016/09/redgraychipsarenotprimerpaint.pdf That is to say, none of the XEDS graphs to which oystein refers to butress his claim that Harrit et al. are dealing with paint primer as pertains to what he refers to as the MEK sample show any trace of magnesium, which Harrit et al. assert is a signature element in primer paint. I’ll leave at that for now, knowing that Oystein will be thrilled at once again being re-engaged. As for myself, my position remains what it is: unless and… Read more »
“Magnesium was never observed … what he refers to as the MEK sample show any trace of magnesium” This plainly FALSE. Here is, again, Figure 14 of Harrit et al (the very MEK-soaked chip): http://i1088.photobucket.com/albums/i328/MikeAlfaromeo/ActiveThermiticMaterial/ActiveThermiticMaterial_Fig14.jpg There is a peak between Zn and Al at 1.25 keV – that is the K/K-alpha level of Magnesium. It is not conceivable that the XEDS software would not automatically label such a clear, distinct signal – it is more likely that the authors deliberately removed the label “Mg”. And again, here is Steven Jones own XEDS chart of Tnemec primer from a WTC column: http://i1088.photobucket.com/albums/i328/MikeAlfaromeo/ActiveThermiticMaterial/StevenJonesPresentation1/JonesPrimerPaint-2m48s_bottomright.jpg You can see here that the same small, but clear and distinct peak at 1.25 keV is now labeled “Mg”. (Both, by the way, also have a peak for K (potassium) at 3.3 keV, that is missing its label in Fig. 14). Furthermore, Fig 17 in Harrit et al,… Read more »
Jim Hoffman explains a few things about the spectra contra Oystein’s reading, here.
&
John-Michael Talboo and Steve Weathers contra Oystein’s reading, here.
That is funny they don’t show any real evidence of elemental Aluminum fuel.
Remember no one found a fuel in these supposed thermite, and you probably have microspheres in your pocket right now.
Ha. Ha. Ha. Do have another look, there, Carroll. I know that a while back you said something about having trouble with your eyesight since at least one experiment having gone wrong on you. You want to pay attention to figure 17, eh.
I can see the unsubstantiate claim quite nicely, thank you go find a scientist who can find some actual proof of elemental Aluminum, that’s what you have to do, the burden of proof is on you and Harrit.
You both fail to meet the burden of proof of claim!
Here is one of the best books on energetic materials.
Chemistry of High-Energy Materials
https://books.google.com/books?isbn…
Thomas M. Klapötke – 2012 – Preview – More editions
This work should be of interest to advanced students in chemistry, materials science and engineering, as well as all those working indefense technology.)
I did a calculation once, you would have to have Between 350,000 To 400,000 separate charges,
before you would expect to find one chip residue, in 1000 tons of dust from these supposed electric matches,
There fore to equal the amount claimed by Jones & Harrit, you would have to have millions of charges, the buildings would have had to been stuffed with enough explosives to send them into orbit!
Yet not one detonation wave was heard.
But according to you, there is no elemental aluminium in any of the red-grey chips Harrit et al. examined. Except that there is and in ratios to iron oxide that suggest ‘human engineering.’ But now, instead of deferring to that ‘fact,’ which until now you’ve been denying, you want to talk about something entirely unrelated to the matter at hand as though it were pertinent. Carroll, your attention is so fragmented, and exposition so incoherent, that I cannot take you seriously anymore, although not that you suggestion about ‘igniting’ the red-grey chips in an inert atmosphere is not a good suggestion.
By the way, coming back to the iron microspheres, they are important: if the red-grey chips were only primer, then igniting them would not produce any microspheres. But they do, exactly as Mark Basile independently corroborated, eh.
False the chips contained carbon and steel, so combustion of said chips in oxygen would either way create microspheres from the heat of Iron burning in air causing some carbon to reduce some iron.
As we already discussed in the Chips at Sandia National laboratory.
Norman wrote: “Jim Hoffman explains a few things about the spectra contra Oystein’s reading, <a href="http://911research.wtc7.net/essays/thermite/thermitics_made_simple.html#chemical_composition"<here.” Let me quote the beginning of the section Norman refers to directly: ” 2. Chemical Composition The red layers contain abundant aluminum, iron, and oxygen…” Shows that Hoffman does not know how to read and assess XEDS data – he is most certainly WRONG. To prove my assertion, here is Mark Basile’s XEDS analysis of a red-gray chip that he later showed to react rapidly when heated to unknown temperatures on some steel strip: http://i1088.photobucket.com/albums/i328/MikeAlfaromeo/ActiveThermiticMaterial/MarcBasilePresentation/Basile_39_30_Chip13_XEDS.jpg Basile is the only truther “scientist” who has attempted to quantify the elements in the red material (Hoffman hasn’t, Harrit and Jones haven’t). As you can read, the Al peak turns out to represent under 2% by weight Al, and there is under 3% by weight iron. With 2.6% iron, the theoretically possible thermite content is limited to about… Read more »
No. You imagine that I fail to address your points. But I point other readers to sources that adequately refute your arguments and that I do not need to paraphrase, since I can refer readers directly to the sources themselves, which happen to better express viewpoints with which I wholly concur. So please do refute the sources to your satisfaction. Discriminating readers can decide for themselves which contending viewpoints most likely better approximate a correct interpretation of the ‘experimental’ data at hand. Each point that you contend has not been answered is in ‘fact’ answered by Harrit’s short paper on the primer paint issue, as well as the articles and the webpage I cite as references. I hear your argument quite clearly. The problem, as I see it, is that you do not understand the scanning ‘method’ of XEDS. You argue as if the sampling is of the chip as… Read more »
Sorry off topic but if you wish to take break from looking TEM iron/AL matrix .
http://big.assets.huffingtonpost.com/Sept11DustReport.pdf
and
Mark Basile Project Status – August 2014.pdf
http://aneta.org/911experiments_com/articles/mark_basile_project_status_august_2014.pdf
Dr. Cahill Iron in atmosphere surges.
http://911truthout.blogspot.com/2014/08/wtc-microspheres-better-hta-arson.html?q=TEM
and Fordham university seismic station charts for 9/11 .. or FBI listening to Audio Tapes about 9/11 high temperatures..
Another issue note with regard FOIA releases so far..
No higher resolution exists of Second Plane from FOIA Releases. Please create a bill like JASTA to get those higher resolution video released with the plane this time.. Thanks
https://youtu.be/MlaYuf83s7o
“…the sources themselves, which happen to better express viewpoints with which I wholly concur.” Ok, thanks for admitting you can’t express your viewpoints yourself. I usually assume this means you don’t actually understand what you try to discuss. Now, to refute an argument, you’d need to refer to a particular argument, e.g. by quoting (a relevant part of) it, then writing the refutation (or providing the relevant part of a source of as quote). You still fail at that. Also, Norman, you have yet failed to address the claim that “we do know that if the chips really were primer paint flakes the Mg (and Zn) would be abundant”. <– Please, Norman, acknowledge without further ado that this claim is FALSE, as you know by now that a) There are WTC primer paints without any Mg and Zn and b) Harrit, in his stupid whitepaper, grossly overstated the proportion of… Read more »
Please look up at the top of the thread for an expression of my very own viewpoint, refuting your position root and branch.
There are plenty of serious problems in the Harrit et al paper “Active Thermitic Material found…” of 2009. They boil down to: The conclusions of the paper do not follow from the data; rather, the data actually contradicts the conclusions. I will discuss the several problems in separate posts. DSC DATA SEVERELY LIMITS MAX. THEORETICAL THERMITE CONTENT According to the discussion of DSC data, four random red/gray chips proved to have specific energies of 1.5, 3, 4.5 anf 7.5 kJ/g. The average of these values is 4.125 kJ/g – slightly more than the theoretic maximum of pure, perfect thermite reacting perfectly. The literature on nanothermite, some of which Harrit et al refer to, cites more typical practical values for experimental nanothermite in the vicinity of 1.5 kJ/g. Thus, the chips are almost 3 times as “energetic” that actual pure nanothermite. This is proof positive that at least a part of… Read more »
The third paper in the article above (Harrit(2009): Why the Red/Gray Chips Are Not Primer Paint”) commits a number of terrible mistakes. I try to be brief: 1.) He assumes there was only one primer paint formulation on the WTC steel (Tnemec Red/99); and he assumes that there was only one kind of red-gray chips, as could be identified by elemental composition (that represented by the four chips a-d in Fig. 7 of the Harrit et al “Active Thermitic Material”) paper. Both assumptions are WRONG. This immediately kills the paper, for the logic of the paper goes like this: “I compare A with X. A is representative of all chips, and X is representative of all paints. A is different from X, therefore A is not paint” Suppose we were not talking about dust particles, but about cars: We find some object at a crime scene and want to figure… Read more »
(Apologies for not closing the “strong” tag properly)
So an “official” attempt to replicate and verify the ‘Harrit et al.” study would be in order, then?
Rule of “So” applies; No! The only thing in order would be for Harrit to feel hotly ashamed for having put out such a stupid paper and revoke it with due apologies. Did you not understand that I explained at length that Harrit(2009): “Why the Red/Gray Chips Are Not Primer Paint” is hopelessly flawed, beyond repair? Or rather, once he were to repair his egregious mistakes (and were aware of some publicly available facts that he was ignorant about in 2009, and may still be ignorant about), the corrected paper would actually help to REFUTE the main paper that had himself as lead author? So if Harrit actually refutes Harrit, why do you feel an additional “official” (what does that word mean in context, anyway?) would be needed?
Have you published your critique of Harrit et al. in a peer reviewed journal? If not, why not?
A) You are here commenting on my critique of Harrit(2009): Why the Red/Gray Chips Are Not Primer Paint – a white paper not published by any journal and not peer-reviewed. Why would I have to publish anything about anything in any peer-reviewed journal to refute a stupid whitepaper? B) This thread has been set up by the Off-Guardian folks to discuss the scientifc merits of Harrit et al, Millette’s study and the Harrit whitepaper. No qualification is required to participate. It is silly and dishonest of you to ask me to jump through some specific and arbitrary hoop. Do you hold yourself to the same standard? Why do you post here, if you have no peer-reviewed article on the topic to your name? C) My arguments are valid and my claimes correct, or they are not. They are relevant, or they are not. If you can’t refute them, you can’t… Read more »
Publish them in a peer-reviewed journal. Lets see what other experts in chemical physics have to say.
Thanks for admitting that you can’t refute my arguments. They thus stand unrefuted. 🙂
And unaccepted.
😉
“So if Harrit actually refutes Harrit, why do you feel an additional “official” (what does that word mean in context, anyway?) would be needed?”
A) I have not come across Harrit’s refutation of Harrit et al. anywhere. Do you have a citation?
B) “official” (what does that word mean in context, anyway?)
Gee, I wonder, eh? Everyone talks about the “Official Story” of 9/11. What could the word “official” mean in this context? Perhaps it means to suggest a proper replication and verification of the study by people qualified to do so. What else do you imagine it could mean?
A) You have not come across the refutation only if you did not read my main comment above. Did you read my comment and try to understand it? It IS the refutation. The last paragraph of the main comment I wrote on the Harrit whitepaper summarizes the refutation. I’ll try to re-write it for you: Harrit employed a certain method in that whitepaper in an attempt to prove that a particular paint chip is not a particular kind of paint, and he concludes from this that all the chips are not WTC paint. However, if he were less ignorant and had actually compared that particular chip not to Tnemec paint but to LaClede paint, then he would have concluded that that chip actually IS paint. Furthermore, if he had compared the XEDS of of the MEK-soaled chip (Fig 14 of Harrit et al) with the Tnemec recipe, and if he… Read more »
Ok, IMG tags didn’t work. Direct links then:
http://i1088.photobucket.com/albums/i328/MikeAlfaromeo/ActiveThermiticMaterial/StevenJonesPresentation1/JonesPrimerPaint-2m48s_bottomright.jpg
http://i1088.photobucket.com/albums/i328/MikeAlfaromeo/ActiveThermiticMaterial/ActiveThermiticMaterial_Fig14.jpg
Yup, I can’t tell the difference. Except that they are, eh.
Do tell! 🙂
Is there something more that I should be understanding, here, other than you are going to insist that they are “similar,” which by definition means they are actually “different,” but essentially both the EXDS(s) of primer paints?
“Is there something more that I should be understanding, here, other than you are going to insist that they are “similar,” which by definition means they are actually “different,”” Yes! You should be understanding how to read XEDS graphs, and why “similar” is not the same as “different”. No two XEDS charts, even of the exact same spot of the same specimen, are ever exactly the same, they are always “similar” at best. I tell you why I say the graphs above are a good match: * They have significant peaks for the same 11 elements. This is quite impressive already! (Mg and K are not labeled in Fig 14, but they are clearly there; Ca is incorrectly labeled “C” in Jones’ graph) * Of these elements, C, O and Ca are the largest peaks * Fe and Si are strong also * Significantly (this is a key difference to… Read more »
What is your point, Oynstein?
“What is your point?”
Is that really so difficult to discern??
The one (only one) chip in which Jones (Harrit et al) alleges to have found a minute trace of elemental Al, the one he soaked in MEK after producing Figure 14, happens to be a good match, by XEDS analysis, to actual Tnemec primer from the WTC!
And the one chip that Harrit focuses on in his whitepaper happens to match almost perfectly the elemental composition of the LaClede primer that was painted on the WTC floor trusses!
“Oynstein”
Is that misspelling of my nick supposed to be an insult? You seem to use it when you are annoyed and give up even just feigning a rational debate.
So then there was indeed nothing more that I should have been understanding, here, other than you were going to insist that the two EXDS(s) were “similar,” which by definition meant they are actually “different,” but that essentially they were nevertheless both the EXDS(s) of primer paints. How did I know you were going to prove me exactly right? Oh, that’s right, because you already had made precisely that argument and just keep repeating it in slightly different but actually very similar iterations.
“So then there was indeed nothing more that I should have been understanding, here” If you are contented with not understanding Harrit’s work, their methods, their flaws, my critique of it, well, that’s your prerogative. One final set of question: This current thread of comments between you and I goes under my main comment which discusses the whitepaper Harrit(2009): Why the Red/Gray Chips Are Not Primer Paint Did you ever read that whitepaper, yes or no? And if you ever read it: Did you notice any of the errors that Harrit committed? Particularly any the following errors: 1. Erroneously assuming implicitly that there was only one kind of primer paint in the WTC 2. Erroneously assuming implicitly that all red-gray chips have the same elemental composition when even the Harrit et al paper (“Active Thermitic material”) is explicit that there were chips with several different compositions 3. Erroneously assuming that… Read more »
What I understand is this: A) Harrit et al. have been accused of having found nothing but primer paint by some for various reasons. B) Harrit et al. deny that they have found nothing but primer paint. C) Niels Harrit has written what he believes is a sufficient refutation of the accusation that Harrit et al. found nothing but primer paint. D) You believe that you see at least 5 false assumptions underpinning Harrit’s refutation of the accusation that Harrit et al. found nothing but primer paint. E) I know that you are incoherent in your thinking, and no, I will not spend my time pulling apart every absurdity that you spout, as for example, that Harrit implicitly assumes all red chips in the WTC dust to have the same elemental composition while at the same time, as per Harrit et al., explicitly assuming different compositions for the same red… Read more »
Yes to A-D “E) I know that you are incoherent in your thinking, and no, I will not spend my time pulling apart every absurdity that you spout…” You have not shown where I am incoherent because you have not spent any time trying to pull apart even one of my claims. Therefore you have not shown that they are “absurd” or even just incorrect. You choose, deliberately, to not engage in reasoned debate and to remain ignorant. “F) Harrit understands chemical physics at a level of insight that you simply do not and cannot” Irrelevant. None of the five errors requires much understanding of chemical physics at a level beyond middle school – all you need is some readining skills, basic logic and know how to calculate percentages. “G) You may think that you have adequately answered Harrit’s refutation of the “primer only” accusation as well as the essential… Read more »
Calm down, Oynstein. You won already. Remember?
Harrit is ignorant? How does your C.V. compare to his?
Be that as it may, you are sure that what Harrit et al. have found is not an energetic residue, but primer. That much I understand. Well, then, shouldn’t someone out in the world recognized as an authority in chemistry, other than Dr. James Millette, assemble a team, replicate the study, fix it where it is methodically flawed, and then tell us whether they have or have not found energetic nano-particles? Is this not a reasonable position to take? Or do we just take you at your authoritative word.
“Harrit is ignorant?” Yes, certainly 🙂 Regardless of his CV, he is (or at least was in 2009, when he wrote the stupid white paper) ignorant, among other things, of the following facts: 1. That there was at least one red primer paint other than Tnemec on the WTC steel, namely the LaClede shop primer 2. That the one chip he focused on in the whitepaper is a near-perfect match for this LaClede primer paint 3. That the red-gray chips they studied in the Harrit et al paper are actually several different materials, as evidenced by their different elemental compositions; yet he treats them as if they are all essentially the same – all thermitic. Other truther-scientists, including his co-authors Ryan and Legge, have in the meantime conceded that some of the red-gray chips are indeed just paint 4. That the MEK-soaked chip (Fig 14) is actually a good match… Read more »
Shock! You have no training in chemistry? Are you sure? You sound like you know more about chemistry than Harrit and his eight other partners in crime.
Question: why, if a group of scientists say they found the residue of explosives in the WTC dust, is it not reasonable for other equally competent scientitsts to inquire into the matter?
(Now be careful: I used that word again, the “if” word.)
“You sound like you know more about chemistry than Harrit and his eight other partners in crime.” Well thanks 🙂 But I never claimed anything of the sort! What you insinuate here is a strawman. All I claim is that Harrit’s whitepaper is stupid and ignorant of important, relevant facts. I provide reasons. If you want to argue rationally, please address my claims and arguments, not strawmen. “why, if a group of scientists say they found the residue of explosives in the WTC dust, is it not reasonable for other equally competent scientitsts to inquire into the matter?” I am not telling any scientists not to inquire – indeed I would be happy if some hotshot forensic scientist did this. Well, Millette did 🙂 All you can muster against Millette is some poison for the well – zero arguments, and indeed Kevin Ryan also only poisoned the well and never… Read more »
So I guess that what you are saying is you want us to take you at your authoritative word that Harrit et al. are a bunch of duffers, and you are not, even if your arguments are somewhat inscrutable and incoherent, on the one hand, and you have no formal education in chemistry comparable to any of the people involved in producing the Harrit et al. study, on the other? Is this what you are saying?
“So I guess that what you are saying is you want us to take you at your authoritative word that Harrit et al. are a bunch of duffers, and you are not, …” Rule of so again: No! Strawman! I want you to address my claims and arguments and either try to refute them or acknowledge that you can’t refute them! “even if your arguments are somewhat inscrutable and incoherent, on the one hand, ” Explain! Quote and address an actual argumant in my original comments, and explain why it is incoherent and inscrutable! Perhaps you are missing some detail here, a citation there – sure, my comment wasn’t a journal article. If you need any of that, ask, but please ask specifically, and provide reasons for why you need details or citations. So far you haven’t even begun to scrutinize my arguments. “and you have no formal education in… Read more »
Oystein writes:
Norm replies:
No, silly. A bad set of arguments ought not be anybody’s business except the author’s. The author should fix his own crap. But first he’d need to acknowledge that he had produced crap. It’s your claims, and your claims are not made out. Hell, even I, a nobody with no training in chemistry or forensics, can point out all manner of flaws!
Then why wasn’t the failed Harrit paper corrected by Harrit, the meme micro spheres and ignition mean thermite, is false and that is all the paper stands on!
Jones himself suspected the chips to be primer paint, and Jones couldn’t do science, he could have found that microspheres he searched for in his own pocket they were that close to him all along!
The chips the spheres are meaning less two politically obsessed dimwits who couldn’t do the hard work of science and never proved their hypotheses, because they jumped to false conclusions.
uh huh.
Magnetic toner ink uses microspheres from fly ash from coal fired power plants, as does the magnetic strip on credit cards.
I always suspected the chips to be either credit cards, or primer paint.
The bank data center printed checks and credit cards by the thousands.
I actually sent credit card material oxidized off to get tested, but Oystein’s EDS spectra is a closer match.
The credit card actually had elemental aluminum as a component, I believe as a foil backing to the magnetic strip
Monsieur Caroll, écoutez-moi, la controverse sur les micro-sphères est dépassé depuis Harrit et al. I think I already made the point a while ago, and even left you with a question to which you never bothered to reply.
You and Oynstein (sic) also made your point long ago if somewhat incoherently: Harrit et al. are dumb and incompetent, and you are both hugely smarter than they are, both masters of logic and chemistry; moreover, they only found primer paint until it ignites in an inert atmosphere ( just as others like Denis Rancourt contend that they only found “rust chips” that by themselves flare up at 430 degrees Celcius).
We get it already, get it? We may be slow than the two of you, but not so sluggish that we do not by now grasp the essentials of your “arguments.”
How’s the huge and shockingly revealing email dump coming?
That is up to the admin here, if they do not publish as agreed then I will simply send the data to another site,
I kept my word I didn’t have that many conversations with Jones.
If they don’t publish, give them permission to send the lot to me. I will publish them with relish . . . and maybe also a bit of ketchup . . .
Norman,
“You and Oynstein (sic) also made your point long ago if somewhat incoherently: Harrit et al. are dumb and incompetent, and you are both hugely smarter than they are”
I already told you that this is untrue .- why do you repeat the strawman when I specifically instructed you not to erect strawmen?
I did not say Harrit is stupid – I said his whitepaper is. Even smart people sometimes put out stupid work. There is no shame in making mistakes. There is only shame in not correcting them.
In your case, you pride yourself of misspelling my nickname. That is almost what defines a 9/11 Truther: Choosing to persist in error consciously when corrections are readily available.
@Carroll,
please note carefully that the discussion here is about Harrit’s whitepaper “Why the Red/Gray…”. You talk of microspheres, credit cards, toner, … WHY?!?!?! This is off-topic, a distraction, confusing, incoherent, and plainly unwanted. Please refrain from mentioning things not directly related to Harrit’s whitepaper! Thanks!
“Norm replies: No, silly. A bad set of arguments ought not be anybody’s business except the author’s”
Ad “Tu quoque” to the rapidly growing list of fallacies you commit in this discussion 😉
And note: I DID in fact address the bad set of arguments in Harrit’s whitepaper at length, while you, Norm, FAILED to address my arguments.
You lose the debate by default for not even trying to address any arguments.
Aw shucks. I lost the debate. I concede defeat, then, and retire, bruised and beaten and humiliated and shamed, from this merciless battlefield where only the true titans of reason do remain standing.
Ok, bye, until you are ready to actually address my arguments, rather than put me down personally 🙂
There is no evidence of thermite damage to WTC steel on 9/11. Like looking for gun in a murder by knife, illogical. The Jones/Harrit paper includes a DSC for the dust compared to nano-thermite, and the graphs do not match. The energy level in Harrit/Jones dust does not match the energy levels of thermite. Burning paper or plastics create more heat energy than thermite can produce. Gasoline/jet fuel have 10 times the heat energy of thermite. The office fires in the WTC towers prior to collapse had more heat energy than 2,700 tons of thermite. How much thermite was used in the fantasy version of 9/11.
john spoke, and all went quiet . . . and in the distance, the faint stridulating of one lonely cricket could clearly be heard, it being midday . . .
If the Emails are ever published I have something shocking to add, but that is up to Admin, to publish them with Dr. Jones’s permission, over Ziggi’s who was not a perticipant in the conversation objections.
Steve Jones has given you permission to publish them provided you publish them in entirety. We have told you we will format them for you once you send us the complete collection. So far you’ve only sent some segments with author names removed and in no chronological order. Please send us the entire collection intact and we will publish them as per Jones’s requirement. Until then refrain from alleging anything about their contents please.
I sent you the complete collection as Unedited text files last night did you not receive them or are you bowing To ziggi’s wishes?
We received them this morning.
Admin if you had read the Emails it is probably clear to you why Ziggi doesn’t want the comments about ink toner to be shown.
Effect of Micro- and Nanomagnetite on Printing Toner Properties – NCBI – National Institutes of Health
http://www.ncbi.nlm.nih.gov › PMC3916107
by M Ataeefard – 2014 – Cited by 4 – Related articles
Jan 19, 2014 – One of the most important ingredients of toner is magnetite (Fe3O 4) which … Iron oxide is the strongest natural magnetic mineral; it occurs in many …
Please could someone just give a workable coherent theory that would involve A thermite or explosive CD, that fits the observed evidence?
I have looked at this from a Science prospective for yesrs but as yet none has been proposed.
All have fallen collapsed in upon themselves.
Great news from AE911Truth: I just received an email from AE911Truth with the encouraging news that the article, “15 years later: on the physics of high-rise building collapses” by Steven Jones, et al, which was recently published in Europhysics News, the magazine of the European Physical Society, has just exceeded 250,000 online views. In addition, the magazine’s 25,000 subscribers — all physicists in Europe — have received a printed copy in the mail. The article was also recently published in Off-Guardian here: https://off-guardian.org/2016/09/07/on-the-physics-of-high-rise-building-collapses/ According to Europhysics News’s metrics, this dwarfs the popularity of the next most read article which has received about 1,300 online views. So it seems that many scientists and engineers are certainly interested in the topic! AE911Truth are mailing the Europhysics feature to 164 employees and contractors who worked on the NIST WTC investigation, in the hope that this will encourage some of them to speak out.… Read more »
from Steven Jones in response to Carrol Sanders: Yes, I recall his emails and those of Frank Greening – I would like to see Mr. Sanders release these emails as long as – 1)He releases ALL of the exchanges that include my name on the emails in any way (including cc’s) 2)This would include comments from David Chandler also. Those comments to Greening are remarkable, imho. I don’t want to see him cherry-picking my comments, as he seems to be doing now. Sanders wrote: “To continue the debate I gave my word I would not publish them without Jones permission I did not say I would not discuss them as historical documents. Jones can free me of that promise if he so choose to do so….” Well, I don’t recall exacting ANY SUCH promise from Sanders – but as he releases the documents, we shall see, won’t we? IF I… Read more »
I have no problems releasing the entire conversation, in it’s oridginal unedited state, and making it public as long as Jones has no Objection it will however take some time to format it to a form that can be uploaded the invite conversation is stored on one DVD.
You can send us the raw text files if you like and we can format them.
I have sent you the first batch of Emails there are several more I have thousand from multiple researchers, I have to go though, I am only sending those that are relevant to Jones and in my possession.
Some of my other Email respondents have asked for privacy, including some of the NIST researchers that I have had disagreements with I have to sort though them all, and I am removing the Email addresses.
We haven’t received anything from you so far. Send to [email protected]
Admin, he has already provided excuses for his plan to send you the emails edited to his liking. There is nothing in those emails to support his case. These 2008 emails involved speculations by Dr. Greening about Dr. Jones finding spheres from fly ash contamination but Dr. Jones put that idea to an end when he published the nanothermite paper with Harrit et al in 2009, which showed that a red thermitic material found in the dust forms those spheres upon ignition. Blast furnaces are able to form fly-ash spheres because they reach double and even triple the temps of open air fires such as building fires, and those spheres end up as oxides because they are formed via burning/oxidation. If you take the time to understand Harrit et al you will see that the red material forms iron from ion-oxide via the opposite process called reduction, and that this… Read more »
Did see a Ziggi anywhere on the list of Emails I already sent did you Admin Jones is OK with releasing the Emails what does Ziggi fear.
And I am trying my best to recover all the emails in their original conversation unedited.
We already established the the false meme, Microspheres mean thermite is false Ziggi.
That should have been Didn’t see Ziggi Admin, voice type messing up on this not so smart phone.
I am still working with only my phone right now.
Hey Ziggi any word on that Mark Basile study, that on the red gray chips, can’t he settle this debate for us?
That was the additional TEM work? To confirm (or falsify) Harrit et al?
No that is the additional testing by an independent Lab Ziggi raised 5000 Dollars to do and never has been done.
Should have taken a couple weeks No word on it in years.
http://www.markbasile.org
Ziggi knows that the 2009 paper by Harrit et al (actual lead author was Steven Jones) suffers from huge problems: It’s conclusions rest on the internal assumption that all dust chips that are attracted to a magnet and are layered red and gray are essentially the same material – regardless of their elemental composition: They say that some contain copper, or barium, or lead, which others down’t. The chip in Fig 14 has a composition very much different from those in Fig 7, the ignition residue in Fig 25 alone is rich in titanium, etc. But why shoud we expect that materials with different elemental compositions have the same properties – thermal as well as when tested with methods like MEK-soaking or measuring electric resistivity? Ziggi is fully aware that some of the paper’s authors later tried to back paddle and suggest that some of those red/gray, magnetic chips are… Read more »
So an “official” attempt to replicate and verify the ‘Harrit et al.” study would be in order, then?
The presence of thermite in the WTC dust has not been conclusively proved and won’t be until we get info on whether the chips can go off in an inert gas – ie take their oxygen from the ferrous compound. Thermite or no, though, the NIST report remains inadequate. For me and many others it’s not a question of competing hypotheses, it’s a question of NIST’s failure to establish the fire-collapse hypothesis as being the most probable. They have not been thorough in ruling out other – seemingly more probable – causes and have not provided adequate data to support their seemingly improbable conclusions. Too many unanswered questions. Too many unaddressed anomalies. Insufficient explanation of why an unprecedented event could somehow happen – three times – on one day. I don’t endorse (or dismiss) the thermite claim, but I do support the call for a new enquiry to resolve these… Read more »
I have never had a problem with a new Inquiry, I just have problems with people making invalid claims that poison the well for discussion of the scientific evidence on the historic and tragic events of 9/11/2001.
I refused to sign Jones’s petition because he was not a truthful scientist and I have no faith that AE/ 911 truth are actually interested in true research either.
There is to much intellectual dishonesty that they have promoted, to view them as anything more than a private for profit organization cloaked in a not for profit.
I have absolutely zero interest in slagging off scientists or their motives. I don’t know what was motivating Jones, Harrit, Millette, Sunder or anyone. Only obscurantism( pace CloudSlicer) is helped by diverting into personal attacks. Let’s critique the science and only the science.
There are no “problems”. It isn’t solely NIST, it is also Arup, backed up by the vast majority of actual architects and engineers. The collapse due to fire explanation is — by far — the most probable explanation. The problem with the present ‘truther’ orthodoxy — the assertion that thermite of some sort was used — is that there is no mechanism given. How do you use thermite to bring down any of these buildings? You require extremely large amounts, and special preparation, to get a useful result. (Harrit’s “hundreds of tonnes” comment in his interview on Danish TV, quickly walked back, would probably bear out.) Using thermite to burn through the structural steel that the supporting columns were built from would require special preparations (they’re vertical, so the thermite reaction isn’t going to be drawn onto them by gravity). Burning through the girders that comprise cross-bracing wouldn’t do enough… Read more »
The only problem with the thermite theory is the current lack of data on the inert gas question. Follow ups are needed. I see not enough data to assert the presence of thermite as a certainty, and yet the red-gray chips remain anomalous. If they are primer paint why did Millette fail to prove it or even to publish? If not primer paint, then what? We simply do not know. In purely scientific terms the claim of thermite is not extraordinary at all. You seem to use this term subjectively to denote things you find hard to believe, bit this is not what “extraordinary claim” means. In purely scientific terms the presence of thermite is far less extraordinary than the claim of fire-induced collapse. Because thermite is a known agent of demolition and is precedented, whereas fire-induced collapse of comparable buildings has literally never been recorded before and is therefore… Read more »
Interesting discussion, thanks to everyone for your contributions. Again, approaching this from the lay person who wants to steer clear of claiming to be sufficiently knowledgeable to adjudicate conflicting claims, I have a few observations/questions for those who claim this level of expertise. Does anyone know when Steven Jones first claimed that thermite was used to bring down the towers ? I may be wrong on this point but I seem to recall him making this claim in the weeks /months after 911. Just wondering if anyone could shed some light on why it took him 8 years (? ) to test his claim ? If my memory is correct, isn’t this inaction somewhat inexplicable ? Taking him and his claims at face value, I am trying to imagine how a responsible person who believed he had just witnessed the demolition of the 2 wtc towers using thermite would make… Read more »
Jones didn’t enter into the 9/11 debate or make any public statements about 9/11 until 2005.
The thermite claims are based on analysis of the WTC dust, not on watching vids.
Jones has worked with colleagues at BYU and elsewhere to produce the thermite studies. You must be aware he is not the only scientist who has alleged the presence of thermite or questioned various aspects of the official theory.
Thanks for the reply. Yes, I am aware that he is not the only scientist who has alleged the presence of thermite etc. By peers here I had in mind his colleagues in the physics/engineering departments at BYU, namely, those individuals who would have been familiar with his 911 related claims while also , presumably, viewing him as a respected physicist with a successful academic career and therefore someone to be taken seriously. I find it remarkable that apparently not a single colleague from BYU agreed with his 911 claims. Or if they did, none were willing to go on record with same. Are honest physicists/scientists really such a rare commodity ? Maybe I imagined it, but I thought I recalled seeing a video where Jones claimed that his suspicions about the towers being demolished with thermite went back to when he first saw the footage of the fires/collapse i.e.… Read more »
Jones publicly stated that he did not get involved in a he CD theory until after watching Dylan Avery’s 2004 film Loose Change. He watch building 7 fall on that internet film and became hooked.
He first proposed RDX, before thermite, once he was informed RDX would burn off in the fires he proposed nano thermite based on the letter from Lawrence Livermore national Laboratory.
Jones mistook gas pressures work to mean explosives.
Maybe defer further claims or descriptions of what Jones may or may not have done until you have managed to find that email he’s given you permission to publish in full?
Also a reminder that another commenter has asked for a ink to be provided
It is well known that Jones showed scenes from the film Loose change, at his first seminar in 2005 at BYU.
He even publicly stated not in Emails publicly to have Voted for GWB. In 2004 as a conservative Republican.
This has nothing to do with the Email conversations it is history.
In Jones’s own words.
“Personally, when I first saw these videos at WTC7.net and noticed the straight-down
symmetrical collapse of this building, my curiosity was roused as a scientist.12 Of course, you should
observe the collapse yourself and consider if the rapid collapse of the building does not look a bit
strange and worth further scrutiny.”
That was the edited video from Loose Change without the east penthouse falling.
I already pointed out to you that two other BYU faculty scientists were involved in the work on the red-gray chips. There’s little point in asking questions if you don’t bother to read replies.
Thanks for the reply.
Does ‘involved in the work on the red-gray chips’ mean that these BYU colleagues supported his conclusions about nanothermite having brought down the towers ?
Yes, they co-authored the Harrit et al paper cited in this article. The paper btw does not conclude thermite brought down the towers, and this is not Jones’s stated position. The paper cites data that they interpret as indicating the presence of thermite in the WTC dust. It’s precise role in bringing down the towers would have to be determined by further investigation.
please note all the information you have asked for and which I’ve taken the time to provide is available in the article above. Take the time to read before enquiring please.
Thanks again. Indeed I had missed the involvement of these 2 BYU colleagues. Heard a lot from Jones, Harrit, Ryan etc. but nothing from Farrer and Farnsworth. But I intentionally don’t bother trying to delve into the scientific arguments for reasons already given. It is nevertheless remarkable that the videos of the collapse led Jones to suspect the involvement of thermite and further that he was able to confirm same through testing the dust. To me it either implies remarkable omniscience on Jones’ part or alternatively that it was clear to him as a physicist (and therefore millions of other qualified scientists worldwide ) that the collapse could not have been due to plane impacts/fire. Presuming here that as a physicist he has no particular expertise in building demolition, structural failures etc. and that any forthright and competent physicist ( along with engineers and scientists from a swathe of related… Read more »
@Jerome Fryer September 28, 2016 “There are no “problems”. It isn’t solely NIST, it is also Arup, backed up by the vast majority of actual architects and engineers. The collapse due to fire explanation is — by far — the most probable explanation.” There you go again Jerome, frying up another mess of red herring with generous side helpings of distortion and misrepresentation. Any acceptable hypothesis must account for all the evidence, but neither NIST or Arup do this, for whatever reason. Instead a great deal of evidence is simply ignored and/or dismissed. That alone is reason enough to invalidate their claims to have ‘explained’ the actual collapses. The ignored evidence includes: the very high temperatures which persisted for weeks after the collapses and which could not have been due to conventional fires; the presence of molten iron/steel during and after the collapses; sequenced squibs and plumes of smoke in… Read more »
“The ignored evidence includes: the very high temperatures which persisted for weeks after the collapses and which could not have been due to conventional fires;” High temperatures are entirely explicable by the fires, and the fires are entirely explicable by the collapse of the towers (while they were still on fire, but that isn’t necessary). This is why no one in the FDNY found the fires unusual. “the presence of molten iron/steel during and after the collapses;” Both parts of that assertion are false. The heat from the collapse and fire was sufficient to make some steelwork glow with heat, but it certainly wasn’t molten. The material seen flowing from the tower was most likely aluminium from the aircraft, and/or other metals with a low melting point. Aluminium glows yellow when heated above its melting point — it does not stay the initial silvery colour. “sequenced squibs and plumes of… Read more »
What you are suggesting is that all the observed phenomena may have alternative explanation – some more plausible than others. But offering a an alternative hypothesis is not ruling out CD, nor even rendering it improbable.
Watch the video Jerome. There are experts right there (not truthers), examining the strange fused lumps of steel and concrete, talking about the steel being “molten”. The molten steel is well-attested as an observation and Grosse’s flat out denials are unfathomable. Did he not talk to the FEMA scientists who described molten steel? or the firefighters who described molten steel?
If you think the entire potential energy of a falling block is available to pulverise anything it impacts while continuing to fall at near terminal velocity you don’t understand the physics of falling bodies, and presumably you never will since it has all been explained to you numerous times already.
Lose the Banzantian Falling block meme and you might start to understand the Roosd connection failure that occurred in the towers .
The buildings have to begin coming apart inside before movement is observed on the outside.
@Jerome Fryer September 30, 2016 Thanks, Jerome, for that obfuscating and wild Gish gallop, clearly used to completely evade the central point of my comment, which was this: the official, so-called ‘investigation’ by NIST is invalid because large amounts of potentially pertinent evidence were ignored or dismissed out of hand. Any investigation or inquiry which blatantly ignores evidential data in its analysis, and its subsequent explanations and conclusions, has failed in its performance and should rightly be regarded as worthless and a sham. It doesn’t matter whether one agrees or not with the proposed results of the inquiry. If pertinent evidence has been ignored or excluded from consideration, then the inquiry was not fit for purpose and needs to be repeated properly. If the police declare that the death of the poor old lady was accidental (as per my analogy) one may be inclined to accept that result because it… Read more »
Was responding to each of your points. If you had one point, instead of several, then the response would be shorter — so the ‘Gish Gallop’ is on you.
None of your “problems” are in fact problematic. Unrelated accusations don’t address that.
No, you were not “responding to each of [my] points” – you were obfuscating, and you completely evaded my central point about NIST ignoring vital evidence in their so-called ‘study’ and ‘report’ and that this de facto makes it not fit for purpose.
That was the main plank of my argument, and I note that you have just evaded it again in your latest reply above using another familiar technique from your obscurant’s toolbox.
Jerome, Regarding my point about NIST ignoring the evidence of the lateral and high velocity ejection of heavy steel beams and girders from the towers, you say this: “This is also entirely expected. No special preparations were made, so the internal structure was not ‘trained’ to collapse nicely — large sections of material were thrust aside, and behaved exactly as you would predict.” What the heck does this even mean? “The internal structure was not ‘trained'”!? The very heavy building components were not trained to suddenly fly out of the building in upward and outward trajectories either, but that did not stop them doing just that,the little rascals! For the sake of simplicity let’s just focus on this one topic, shall we? Elsewhere on this thread you say that you understand Newtonian physics, so can you please provide a natural reason for heavy beams to be propelled upwards and outwards… Read more »
You should learn something about how controlled demolitions are performed.
If you don’t actually know anything about CD, then it’s pretty stupid to be asserting that the WTC collapses were CD.
And once again you evade.
I asked you to justify your statement that –
“large sections of material … behaved exactly as [one] would predict”
– by asking you to explain how beams and girders could experience high velocity lateral ejections, travelling hundreds of feet away from the building. Which physical mechanisms are involved here, which would be capable of doing this?
I myself cannot think of a natural explanation for this behaviour, so I’d be interested to know why you think you can. Please explain.
Nice video it refers to a several violations of the laws of physics, for instance red glowing flowing steel is not possible. The meteorite mentioned was not molten it was swaged by intense pressure in the rubble pile. Path subway tunnels and tunnels for cables and piles the ran into the basement of all the buildings acted as ventri tubes pulling air into the pile inducing strong oxidation. Carbon monoxide is an explosive gas produced in fires in combination with carbon black it can trigger fuel air blasts. Since no detonation waves were noticed or recorded it is most likely that any expulsion not related to pressure events do to collapse would be fire induced fuel air blasts. Low melt metals like lead and aluminum were found in the rubble pile as solidified melts. No solidified melts of steel were ever recorded, There was one beam from world trade 7… Read more »
As Lynn Margulis stated, scientific method requires that you explore the most obvious hypothesis first. As controlled demolition was the most obvious hypothesis shouldn’t that be tested? And when you test that hypothesis do you need the presence of explosives to prove it. Can you not do it just from the way it actually fell, or substantially at least?
Very good point and question. No one can deny the collapse of WTC7 at least superficially resembles a controlled demolition in every observable characteristic, from the initial drop of the penthouse to the perfectly symmetrical implosion at or near free fall. There is no historical or video evidence of any natural collapse that resembles the collapse pf WTC 7 (or indeed i and 2) even slightly. And of course NO historical precedent for comparable buildings collapsing at all (never mind symmetrically at or near free fall) due to fire. So, yes, NIST ought to have examined explosive demolition as a first probability. Precedent and the observable collapse of WTC7 made this highly likely. The fact they didn’t can speak only of overwhelming incompetence (unlikely) or some form of political interference. I don’t think we can simply assume controlled demolition on what we have at the moment however. There’s a small… Read more »
Yet no shrapnel damage was ever found, no Monrue’s effect, No detonation waves, and no mushrooming of steel do to thermite cutting under intense loading.
In other words no one saw, heard, or found any evidence Of CD, and Jones & Harrit knowingly left their work inconclusive.
Jones’s and Harrit both knew thermite was self oxidizing, has to contain aluminum, has to produce Al2O3 as a biproduct of it’s oxidation.
So when they didn’t find Elemental Aluminum in the TEM done by Farrer the next logical step, to finger print this so called smoking gun would to have been inert gas testing and then analysis of the results.
So Jones and Harrit may have rushed to publication and it backfired on them.
“In other words no one saw, heard, or found any evidence Of CD, and Jones & Harrit knowingly left their work inconclusive.” This is patently untrue. There was abundant evidence CD and of explosions and the effects of explosions, along with evidence of the common products of certain incendiaries, such as molten iron/steel pouring from the towers and gathering in pools in the rubble. This is clear from both eyewitness and recorded evidence. The truth is that NIST actively chose to ignore and dismiss such evidence because it did not fit with their predetermined strategy of concluding a fire + gravity collapse. In other words, NIST’s ‘inquiry’ was dishonest and a sham, and not fit for purpose. You seem to have no difficulty of accusing Harrit and Jones of ignoring certain crucial factors in their analytical methodology which, you say, therefore invalidates their analysis and conclusions. So why do you… Read more »
I have disagreed with NIST many times, but I judge everything by logic.
If I hear a reporter state she is standing on rivers of white hot molten steel, then she is either hyping the story for the media or incenerated.
I can not under stand how steel at 1000C would be flowing from the building molten, as I have to heat and have heated steel to 1565C to melt it to do casting.
Thermate would produce Iron Sulfate not iron sulfide, Iron sulfate breaks down at about 350C in air.
What is proposed even by eyewitnesses has to make logical sense. Otherwise it has to be discounted scientificly.
“I can not under stand how steel at 1000C would be flowing from the building molten, as I have to heat and have heated steel to 1565C to melt it to do casting.”
Question: How do you know the metal seen flowing from the building is at 1000C ? Was that temperature measured, or are you assuming it? If it was measured please cite a source.
I agree that if the molten metal was iron/steel then it must have been at a higher temperatures than 1000C. Surely you can concede the point that this may be explained as the result of some (as yet unverified) thermitic reaction(s) taking place within the building?
There’s ample evidence of temps in excess of 1500C. White hot steel, molten steel all reported at Ground Zero. Thermal imaging found temps of up to 2800F in the rubble hot spots. If you selectively ignore the data you’re just affirming your own prejudice.
Was that during Clean up operations, when oxygen cutting was occurring?
Agreed Moriarty, The molten steel pouring from the building must have been in the region of 1500C, and I’m not sure why Carroll uses the 1000C figure in this context, other than the fact that NIST say that the max gas temps reached in the WTC fires was 1000C. From its appearance it certainly looks like molten steel and not aluminium as NIST suggest. NIST has not been able to properly explain this pouring metal and have effectively skirted around the problem in typical fashion. As you say, there is ample evidence of very high temperatures, including persuasive thermal imaging showing temps in the rubble up to 2800F (1538C) which very close to or above the melting point for steel. So, if we have molten iron/steel and the fires were not hot enough to do the melting, then what was? Looks like we’re back to some type of high temperature… Read more »
How do you make thermite react that slowly, you are talking a reaction lasting weeks can you even imagine how much thermite that would require?
The color of the material is yellow, if it were Iron it would be 1000C that is why Steven Jones proposed thermate in the first Jones/ Greening debate in 2005.
Jones believed the sulfur in thermate would !ower the melting point of steel.
Moriarty’s Left Sock wrote: “There is no historical or video evidence of any natural collapse that resembles the collapse pf WTC 7 (or indeed i and 2) even slightly.”
Here are two natural collapses that share characteristics of the WTC7 perimeter collapse – symmetry, suddenness:
1.) https://www.youtube.com/watch?v=D6DwUoqzaeI&t=150
Imagine you were watching this looking at the left face from a right angle: That face collapses symmetrically and suddenly after the structure behind it went first. Same as with the WTC7 north face, which dropped after the core had collapsed asymmetrically (east several seconds before west).
2.) https://www.youtube.com/watch?v=GwQS8xnaPe4
No comment
Each one is a steel framed building? And each has been determined to be collapsing at ‘free fall?”
Steven E. Jones debunked the free fall claim for the towers himself in his public letter to Woods and Frazer.[citation needed – also who are “Woods and Frazer”? – OffG ed]
Who said anything about the Towers?
That first video raises more questions than provide answers. How tall was this building? What state of repair was it in? (It seems to have scaffolding over one side and to be leaning). Why did it fall down? (the video is making bizarre claims about “mysterious planes”). If this was a steel-framed solidly-built high rise collapsing in its own foot print after localised fires then you need to say so.
I don’t understand why you think those questions are raised. I posted the videos in response to Moriarty’s claim: “There is no historical or video evidence of any natural collapse that resembles the collapse pf WTC 7 (or indeed i and 2) even slightly.” This quote does not limit itself to buildings of certain heights, structural materials or collapse cause other than it be “natural”. Asking about fires is your artificial addition. That building in Nigeria collapsed while it was (aopparently illegally) appened with one or two more stories, which may have overloaded the existing structure. It was not a CD, so it is safe to assume that this total collapse resulted from some initial local failure. And yet: Do you not see how, watching from a position more to the left, the face on the left appears to collapse “suddenly” and “symmetrically”? Moreover, that building drops largely straight down… Read more »
Pyrotechnical Confession and World Trade Center Arson Case 9/11
http://911truthout.blogspot.com/2016/09/pyrotechnical-confession-and-world.html
clear example fire fighting actives by PA..
Escape from Tower One by Marianne Millnamow
Page 28 “I found two men WITH HOSES (not FF) trying to extinguish the blase,
North Tower Stairway A 77th floor 9:00AM.
http://www.goodreads.com/book/show/12497228-escape-from-tower-one
“As controlled demolition was the most obvious hypothesis”
Why do you think that?
Controlled demolition was extremely unlikely, for a multitude of reasons. The most obvious reason being that there is no plausible benefit to be gained from blowing up the buildings (and in particular WTC 7, which had no symbolic value and which collapse caused no casualties).
The reason why CD was the “most obvious hypothesis” has been covered many times and does not need to be said again. Given the fact that NO building of similar construction to any of the WTCs had previously been brought down by fire, the INITIAL assumption had to be that CD was the more probable event. But instead NIST went straight to the assumption of fire-induced collapse.
No building of similar construction has suffered simular damage and simular fire conditions, if there is one please show it?
Note I am aware of all the fires and conditions in those fires as well as the buildings structures.
The safe guards to prevent fire damage, and Chimney effect fires were compromised, please don’t make unsustainable claims.
Even if the claim of uniqueness is true this doesn’t change the burden of proof. The claim that fires brought down the buildings can only be proved if other more probably causes are investigated and ruled out. Neither side can circumvent proper investigation merely by asserting their opinions as fact.
Regardless of whether CD was involved or not the fact that the incidents were unique makes comparison of said events with events that do not match them worthless.
That is not an opinion just a fact.
As for CD, the fact fires are noted, the fact damage to the buildings were noted.
The fact a transit was set on the building and a lean was noted prior to collapse are indications against CD.
The people making the CD hypothesis claim can not propose any valid workable theory that is consistent with observation.
For instance how do you protect charges from fires?
How do you protect charges from shock induced detonations?
How do you detonate said charges?
The CD hypothesis has holes you could fly the milky way galaxy though with plenty of space to spare.
Leaping from no previous total collapse of a steel framed high rise to assertions of controlled demolition is incredibly foolish. The facts do not point to that hypothesis. It is far more likely that, as both NIST and Arup found (and several other independent researchers that did partial analysis agreed with) the collapses — all three — were due to fire and the effects on th steel structure. If the buildings had been built differently they would not have collapsed due to fire. A lot of NIST’s work has ended up being put into practice with new regulations for similar buildings, to prevent recurrence of such a catastrophic failure. Any form of controlled (or ‘uncontrolled’, which would be more accurate given the uneven and highly destructive collapses) demolition would have been entirely unnecessary and incredibly risky. How would you get explosive materials past the security, in the first place? How… Read more »
When you say NIST and ARUP “found the collapses were due to fire,” you seem to imagine these bodies examined all the evidence and determined fire-collapse was more likely. You need to understand they did NOT do anything that rigorous. What they did was begin with an assumption that fire brought the buildings down and then produce models to “validate” these assumptions. They explicitly never considered or looked into the possibility of explosives or of any other method of demolition in addition to or instead of fire. Given that fire had never before (or since) produced such collapses this initial assumption on the part of NIST is inexplicable other than by gross incompetence or political interference. NIST should have begun by assuming the likelihood of some form of CD and only proceeded to consider fire-induced collapse when it had entirely ruled out that possibility (if indeed it could). This is… Read more »
Nist’s mandate was to study the Collapse in the interest of public safety, there was no physical evidence at all for CD ever found, there was evidence of fire, fires were directly observed, and reported by Fire Fighters.
The only evidence for CD would have to have come from the steel and would have been spotted easily.
The fact we have so much steel saved, anything unusual, kind of points to the fact that no one saw CD deformed steel in the rubble piles.
They never looked for physical evidence of CD. In science you don’t find what you aren’t looking for. “So much steel saved”? Are you living in a parallel universe? “Some 185,101 tons of structural steel have been hauled away from Ground Zero. Most of the steel has been recycled as per the city’s decision to swiftly send the wreckage to salvage yards in New Jersey. The city’s hasty move has outraged many victims’ families who believe the steel should have been examined more thoroughly. Last month, fire experts told Congress that about 80% of the steel was scrapped without being examined because investigators did not have the authority to preserve the wreckage. “ New York Daily News, April 4 2002 Even Abolhassan Astaneh-Asl, one of the few people allowed to inspect some of the steel before it was removed said he had no time to really examine it properly. “Thanks… Read more »
Yet people with explosives experience were on site since day one.
FBI, NYPD, ATF, all on scene and nothing even noted.
We are asking the wrong questions about 9/11
In 2001, there existed worldwide only about 230 highrises of similar steel-frame design – that’s a very low number. All of these are relatively modern and built to reasonable fire codes, mandating passive and often active fire protection. None of these buildings, except WTC7, ever suffered the kind of brutal events that happened on 9/11. Most significantly: – Active fire suppression (sprinklers) were rendered inoperable (risers cut by plane impacts in 1+2, water mains damaged by 1+2 collapses for WTC7) – Fires started on several floors at once – a rare scenario hardly covered by codes – Fire compartments broken by massive external damage Additionally, no active fire fighting was possible – in the twins this was mostly due to the sheer height of the towers – it took firefighters were long to get there. After the collapse of #2, fire fighters were pulled away from attempting to get to… Read more »
CloudSlicer has asked us to post his comment for him/her: The commentator going by the name Carroll Sanders has made claims on this thread that he was involved circa 2006/7 in email exchanges with Greening and Jones about the iron spheres, so I did a little digging. I found a record of such an exchange in which a ‘Carroll Sanders’ is named once or twice by both Greening and Jones. I provide the link below. I have not yet read the emails entirely, and it may well be that this particular record is incomplete (there may be others out there). It seems, according to Greening’s emails, that fly-ash from power station boilers and incinerators may contain small spheres, which are created at relatively low temperatures in a complex chemical process, and fly-ash is sometimes used in concrete mixtures. So some such spheres may have been present in the concrete used… Read more »
No there would not have been spheres in the concrete, the iron spheres in concrete are magnetically seperated out, of the fly ash, the other metal spheres actually from the use of burning old tiles in the Cement kilns would still be in the concrete. Those though would be molybdenum and not magnticly seperated, aluminum spheres also found by Jones would be from light switches and other sources. There is a really good paper on mirco spheres, simple cigarette lighters produce them, as does welding, cutting and grinding. They have been found in Antarctica, and the Greenland ice sheet. They are routinely transported by Humands, you can even find medical studies on them being found in human bodies. One of the dust samples Jones received actually came from a welders apartment, another from a bridge both of those samples had contamination problems, because of expected natural contamination. I believe though… Read more »
The thing I find very curious about all of these shenanigans Carroll, is this: if you are such an expert on the production of microspheres and their analysis, as well as an expert on the chemistry and correct analysis of thermitic materials, why is it that you have not produced a paper (perhaps with your colleague Greening) which rebuts the Harrit and Jones work and explains where they went wrong? After all, you say in an earlier reply to a comment by Norman Pilon that you “have been researching this since 2005” – surely you’ve had enough time by now to put thought to paper and have it published. And if, in reality, you do not actually possess the requisite scientific acumen to do this, why is it that no other expert has done so instead of you during the last 7 years since the Harrit et al paper’s publication,… Read more »
When will the case actually be made for thermite?
This is all known Science everyone that has looked including Jones and Farrer, Millete, and even Mark Basile has not found any elemental Aluminum in these chips.
Why publish a paper on nonsense it would be a waste of time and resources even submitting it.
Let Jones &:Harrit make the claim by doing the work properly before I waste resources on this, Jones & Harrit need to show at least three things to prove thermite.
Elemental Aluminum
Self oxidation
Aluminum oxide residue.
Those are the three components that prove thermite conclusively.
Carroll FBI bomb squad reported extreme temperatures on audio tapes but somehow you missed that news.
Gerry Fornino, FBI bomb technician, says that “heat was 3,000 – 4,000 degrees
N.W.O was talked about by the 9/11 Commission members.. Other confessions about nano tech and new tech weapons have been spilling daily for 15 years.
9-11 Cop Breaks Silence – Israeli Mossad Involvement in Attacks
https://archive.org/stream/9-11CopBreaksSilence-IsraeliMossadInvolvementInAttacks/9-11CopBreaksSilence-IsraeliMossadInvolvementInAttacks_djvu.txt
CNN Reported Second Plane impact before the impact.
Daniel, you do the Gish Gallop – can’t you concentrate on what is actually being debated here? Carroll, in the post you replied to, asked: “When will the case actually be made for thermite?”
And indeed this debate is supposed to scrutinize three papers (By Harrit et al, by Millette, and by Harrit alone) on red-gray chips alleged to be “active thermitic material” by some.
I think it is best if you, too, tried to focus on that, and learn what’s so flawed about the work of Harrit and Jones.
Do you assume that Harrit et al found active nanothermite in the shape of these red-gray chips?
Do you think the red-gray chips are primer paint? Because primer paint that essentially blows up at 430C would be would be pretty bizarre. If not primer paint, then what?
There is no evidence that any of the chips “blow up”. It is not surprising that they burn away fast when heated massively by am extremely hot torch – they are tiny, which means a large surface-mass ratio. You could likely get the same effect when you direct the hot torch at a mustard seed or a small bit of ear wax. However, the DSC traces show that the chips smoulder away slowly (in the course of several minutes!) when heated slowly and controlledly.
Do you make any effort to differentiate the composition and properties of these spheres?Have you compared the ones for the WTC dust with those produced by the various methods you describe? Are you aware of any comparable situation where spheres of the same composition have been created – in the same numbers?
Why did Greening never address the questions of temps that Jones kept asking in those emails?
Any finely divided carbon with high surface area can combust vigorously in air, that includes carbon based epoxies used in paint.
There having even been paint dust explosions in automotive body shops, during sand blasting operations.
Yes, we did.
Frank did answer Jones, but Jones would not allow the answer to be made public.
Frank and myself and everyone working with us wanted the debate public it was Jones and Harrit and the other members of Scholars for truth that wanted to keep Jones’s miraculous non discovery private, confidential, and from public view.
You are still using the same rather dubious and theatrical tactics I mentioned before – viz claiming there is all this massively important evidence you would show us if only you could. It’s inappropriate and manipulative.
May I ask why you agreed to keep the email private if you considered it so important? I don’t think there’s any legal obligation to do so is there?
To continue the debate I gave my word I would not publish them without Jones permission I did not say I would not discuss them as historical documents.
Jones can free me of that promise if he so choose to do so.
Jones’s data is now public, so keeping the debate private and secret nolonger has a purpose other than that I gave my word.
If you can’t verify or support your claims about what Jones or others have said then you should not make the claims. That’s tittle tattle and evidentially worthless.
We’ve passed on some of your comments to Jones. If the emails exist and are as important as you say, why not approach him yourself and ask him for permission to publish? It seems the only ethical way to proceed.
Jones would never reply to me, because I questioned his theories long ago. Publicly.[citation needed – OffG ed]
Just type in my name, Dr. Jones’s name, and you will find information about an article in the Maui Times about early experiments I did on natural thermitic reactions.
I did not know at the time 2005-6 why I could produce them and why in Jones’s experiments he could not.
Not until I read the Sandia article did it become obvious
high surface area reduced Iron was the key, I was using similar conditions and the correct fuels, in the correct environment, to produce the required catalyst, high surface area oxidizing iron with and in molten Aluminum that triggered larger reactions.
Jones was only heating the materials in a high oxygen furnace, and then trying to get them to react.
Carroll,
I’ve searched for the Maui Times article you mention about the earlier experiments you did on natural thermitic reactions, but I can’t find it.
Could you please provide a link?
Many thanks for your help with this Admin.
I’ve read the email exchange. At most one might draw this conclusion about Steven Jones position on the conditions for forming iron micro-spheres: high temperatures, at or higher than the melting point of iron, are necessary, regardless of the fuel source of the heat. Dr. Frank Greening also contends that if Si (silicone) is an element combined into the spheres, that automatically disproves Jones’s theory of the thermitic origins of the spheres. Jones disagrees because the energetic particulates he looked at both ‘ignited’ and contained traces of Si. Furthermore, Jones does not claim that all of the iron spherules in the WTC7 dust are of thermitic origin. Some, possibly most, are. In the course of the exchange, some accuse Jones of ‘withholding’ data. However, Jones clearly expresses the same sort of concern that Harrit et al. have expressed in connection with Dr. James Millette, i.e., that those at hand intent… Read more »
Why don’t you ask Jones to release the other half of the Email debate for public viewing?
I have the entire debate, and he has the right to release it if he wants everything in the open, and to be truthful.
At this point, in my opinion, as I just stated in my foregoing comment, The “microspheres” debate is neither here nor there. For the claims by Harrit et al. definitively eclipse it in order of primary relevance and importance. In other words, it is a pointless waste of time to dwell upon iron spheres regardless of whether Jones was right or wrong at the time that the debate “raged” if signature traces of ‘explosives’ have been found in the dust — no? That Harrit came along, it seems to me, made that entire conversation irrelevant. What now needs to happen with respect to Harrit et al. is that the study be independently replicated and corroborated or disproved. Full stop. If disproved, the spheres might once again become a relevant and pivotal focus of debate. Until then, I think we can all safely put it to be, eh?
What needs to happen is for the expert Harrit to show a fuel source to power a thermite reaction or to print a retraction of the Harrit & Jones paper, as any honest researcher would do.
Are you a Phd, Carroll?
The letters before ones name have no barring on the correctness of the ideas he or she expresses it is the data that counts.
Dr. Linus Paling was a PHD, he was wrong about vitamin C curring colds.
Faraday had no credentials at all, but was one of the greatest scientists of his time.
That isn’t the presumption I’m underscoring, Carroll. If you have a Phd, you are more likely to be in a position to assemble the means to conduct a replication of the Harrit et al. study and then to get that published, eh. So what are your odds?
Do you mean Linus Pauling?
Your spelling, grammar and general presentation do not inspire confidence.
Having said that, I agree Harrit et al have not proved the presence of thermite.
Yes thank you for correcting that, I am sorry trying to work and reply at the same time, Plus I have minor vision problems from an Aluminothermic reaction that went wrong, I was trying to recreate the conditions of a chimney effect environment inside the towers, when the experiment exploded do to a carbon gas reaction and finely decided iron and molted aluminum was propelled though the air. If you check the data on Aluminum nano particulate fuels, you will find that particle size, of the Aluminum particles directly influenced oxidation rate of the materials. There fore Harrit’s own data in finding platelets confirms that the material is not a high speed explosive, it could be used as an electric match, but not to ignite RDX dirrectly, as Jones claimed because it would burn the explosive not trigger it. To trigger RDX or other nitrate explosives like trinitrotoluene, the material… Read more »
The only problems with that is Harrit uses the notion that micro spheres produced by these chips that contain carbon and burn in air like carbon, are thermite while Sindia labs points out that carbon can reduce iron at as little as 350C.
That kinda throws a big monkey wrench into the mechanics of what Harrit Claims, and remember no self oxidation, no aluminum fuel, no produced Aluminum oxide was ever found.
I also addressed the finding of SI in Jones’s spectrum it would be produced by some thermates or as contamination in steel which is refined from mineral ores containing SI.
At what temperature does Harrit et al. say their energetic particles “ignited?”
430 C I believe in air.
Thermite ignites at much higher temperatures the ignition is from carbon.
Are you certain that Sindia means to say that the chemical reaction as such does not reach a temperature higher than 350C or that the sol-gel thermitic compound “ignited” at 350C, in the same way that the Harrit particle “ignited” at a specific temperature?
And then what if you are right, how does this “refute” the Harrite et al. study? Is it a replication of the study? If not, then why should anyone care?
The Sandia thermite is the exact type Harrit claims to have found the material was heated to 350 in inert gas, the iron oxide in the thermite reduced to high surface area Iron, when exposed to air the iron oxidized causing the thermite to spontaneously ignite.
Since the compounds are similar just heating the Jones and Harrit chips to the temperature where ignition occurs, 430C Can form reduced Iron microspheres in the chips.
So microspheres in the residue of the Harrit & Jones chips are not conclusive
Proof of thermite as Harrit has stated.
A)
“The Sandia thermite is the exact type Harrit claims to have found . . .”
How do you know this? When was this established? By whom? How? Citation please!
B) Who gives a fuck about iron spherules if what Harrit has found IN the dust is, as you yourself assert it, the same exact type that spontaneously ignited in the Sandia lab? If what Harrit found is like or exactly as Sandia lab’s thermite, then what did he find? Please do answer this one question if not the others.
C) I note that you skirted around my first question in my previous reply. Does the reaction itself evolve at a temperature no greater than 350C or is that the “point of ignition?”
Norman, a quote from Jones. “Note added, based on comments received 9-9-12 from Dr. Jeffrey Farrer. 1. Dr. Farrer contacted Dr. Tillotson of LLNL regarding the LLNL production and ignition of nano-thermite; Dr Tillotson said the experiments were likely done in atmosphere. After publication of our paper, others have suggested that the experiments in the LLNL publication were performed in an inert atmosphere; so the picture is not clear to us at this time and further contact with the LLNL scientists is advised. It would be best to run studies in both atmosphere and in an inert gas. 2. The DSC run with the ultra-fine aluminum and iron-oxide (which did not ignite in atmosphere) may have been heated to approximately 800 degrees centigrade. Jeff will check his notes.” The quote refers to Lawrence Livermore National Laboratories, the very place the accidents Sandia was investigating occurred. So Sandia was investigating the… Read more »
Dear Carroll, I’m replying to the comment you made that begins with: “Norman, a quote from Jones.” I’m trying hard to follow your argument. You are doubtlessly making a point. I need more context to decipher your meaning. You need to elaborate in greater detail. It is impossible for me to jump, logically speaking, from the Steven Jones quote to the “accident Sandia was investigating” to “So Sandia was investigating the same Areojel nano thermite Jones believed he had found.” Are you saying that samples got mixed up? If so, how? If not, what are you saying? Too much information is missing for me to even begin to discern the connections that you must have in mind. Please re-write what you are trying to say in a more accessible format. Going back to my previous comment, lets simplify this exchange and begin with only this: When you write, the “reduction… Read more »
Carroll, This quote echoes the one you threw at me, but with important distinctions: Steven Jones is the writer and he is giving advice to someone on how he or she might go about replicating some of the work he and his colleagues did on the WTC dust (worth reading in its entirety, by the way, for anyone reading this comment): Quote begins: You suggest that you would like to ignite the red material in an inert atmosphere, which is not a bad idea but there are caveats. Dr Farrer of our team contacted one of the LLNL scientists about this issue, and was informed that the LLNL tests of nano-thermite were performed in air; which is why we did our tests in air also. Thus, we could make direct comparisons with the LLNL data on nano-thermite fabricated at the LLNL laboratory. Later, we mixed up some ultra-fine aluminum and… Read more »
Norman I am answering your last reply.
The chemical reaction, after ignition produced temperatures of
over 2000C.
The 350C is the drying oven where the reduction reaction occurred.
Jones in 2005 found the 2004 Tillison and Gash letter to the national fireworks convention.
On the Lawence Livermore nation laboratory, Areojel thermite.
Jones found the red gray chips and jumped to the conclusion they were Areojel thermite.
Sandia was investigating the accidents that occurred in the drying oven at Lawrence Livermore national laboratory, involving the same Areojel thermite.
Jones didn’t know that Areojel thermite was worthless as an explosive. Slowest burn rate of any Aluminothermic.
Shock and heat sensitive, used in gun primers, electric matches and fire works.
Norman – Jones tested a thermite he prepared himself not the red gray chips, he found in the dust.
The thermite Jones made himself did not include carbon, therefore it would not ignite in the DSC or in air, below 1400C.
Thermite with carbon will ignite at 430C, in air.
Paint with carbon will ignite at 430C in air.
Areojel thermite will ignite at 430C in inert gas.
Paint chips will not ignite in inert gas, no matter how hot they are.
No inert gas tests on the red gray chips were ever conducted.
[edited for clarity – OffG ed]
Thank you. Now we are getting somewhere. Because it’s late for me, I’ll leave this until tomorrow. But now, I think, I’m both hearing you and understanding you.
Until tomorrow, then . . .
Hi Carroll, Okay, I see the rationale for why in your mind the Harrit et al. study fails to prove that the red-grey chips were nothing other than primer paint contaminated with carbon. For you, the definitive test would be to try igniting the chips in an inert atmosphere. If there is ignition, we may have something. If not, then it’s paint. I’m not entirely convinced that Harrit et al. don’t have what they think they have. Harrit seems to believe that he has answered the ‘primer issue’ to anyone’s satisfaction (see the link above, in OffG’s article). But I do agree, a DSC of the actual red-grey chips in an inert atmosphere would certainly decide things one way or another, and Jones even concurs that that would not be a bad idea. I think that everyone here agrees, then: the portfolio of experiments by Harrit et al. deserves more… Read more »
Carroll, I’m afraid you are often so incoherent it’s almost impossible to understand what your point is. Your ad hoc grabs of scientific data juxtaposed illogically through your comments are also impossible to evaluate without greater context .
I don’t disagree with your point about the absence of tests in inert gas, and Jones’ comments seem to make no sense, though it’s complicated by questions of exactly how this alleged fine mix “nano-thermite” might behave. If Farrar really got no ignition in inert gas, then where are we?
The calls CAME FROM 904-555-0004.. PDF is a public document.
Betty Ong 904-555-0004
Amy Sweeney 904-555-0004
Barbara Olson 904-555-0004
Barbara was on another flight and still used the same number.
Admin –
I have been trying to post comments, both last night and today, but the system is not displaying them. I have successfully posted comments before, and I have been doiong nothing differently.
Is there something wrong with your comments process?
Well – that one appeared!
I’ll try again with the one I’ve been trying to post today …
watch this space …
Sorry Admin – it just isn’t working. Which is a shame because I’m trying to post a single link to a record of an email exchange between Greening and Jones, which mentions one, ‘Carroll Sanders’ – a commentator on this thread who has been making claims about such an exchange.
My (attampted) comment also includes some notes I made about my own reading of this email exchange, but the overall comment is not long. I don’t know why it’s being blocked.
I’ve tried to post just the link on its own, but the system block it. Weird.
I’ll try emailing the info to the [email protected]
Hopefully you can post it for me?
no idea what might be going on there, you have no comments in the queue
This document may be worth going over. It is a court case that Con Ed brought against the owners of WTC 7, citing structural deficiencies as the cause of collapse following the fire. http://caselaw.findlaw.com/us-2nd-circuit/1651388.html This excerpt quotes the FDNY: Chief Daniel Nigro reported “more fire” at 7WTC on September 11 than he had “seen in [his] entire career” before the fires at the World Trade Center Towers. Both Nigro and Hayden observed fires burning on multiple floors of 7WTC. “Under normal conditions a fire starts at one floor and works its way up and you might have a few floors of fire if the fire department can’t get a handle[ ] on it. It is rare that you see fires on noncontiguous floors in a high-rise.” Others reported fire “pushing out of the top floors.” Firefighter Tiernach Cassidy reported that “most of the windows were broken on the south face… Read more »
That could be the result of a chimney effect cause by the dislodged elevator doors, rupture of the fuel line to the generators on the roof, or simply increased oxidation of carbon and other combustible materials in the collapses.
Spark plug effect, as I like to call it concentrating oxygen and fuel in the compression zones formed by the collapsing floors as the buildings towers connections fail.
It would have been similar to a cars internal combustion engine, igniting fuel in compressed air.
I stumbled on the phenomenon early in doing fire experiments back in 2006.
J-REF types like Jerome and Carroll hung out for years at the BBC Conspiracy Files blog and comments threads, desperately trying to re-write Newton’s First and Third Laws.
How can some one rewrite Newton’s laws?
The (understand) of the physics is what is in question not the physics.
That was pointed out by many, including PHD physicists.
“The (understand) (sic) of the physics is what is in question not the physics.”
You betcha!
Ask NIST.
What does that even mean?
I think he means that his understanding of the physics is better than anyone else’s.
And that anyone who can’t see, as he himself does, that the destruction of the buildings is all explained by fire-induced gravity driven collapses, has therefore not understood the physics.
Hi Carroll,
Your points and theories are interesting and certainly worthy of addition to the ‘debate’ here. I have a somewhat naive question – can you explain (based on your theory that rather than explosives, the bolts / girders failed in WTC7 causing overall collapse) how it would be possible for all the connections to fail simultaneously so as to initiate such a rapid collapse? Why wouldn’t the resistance offered by lower floors slow the collapse ( below floors on fire). I am aware of reports of buckling of building prior to collapse… Cheers
The east penthouse collapses that weight crushed the lower transfer trusses, the interior of the building then falls towards the damaged side kicking out the facade as it spreads and impacts it from below.
That causes the top of the building to fall into the now empty space with no resistance to collapse.
Thanks – how did the east penthouse collapse exactly then, as it was a long way above the fires?
A chimney effect in the shaft of the dislodged elevator reported by Mr. Jennings.
I only signed up to the ISF (former JREF) a few days ago, specifically to ask about input into this series on Off Guardian, after being prompted to do so by the editors (or one editor, or moderator if those are different people). I have never seen any of the BBC series. My guess would be that it is shoddy ‘infotainment’ packaged as science reporting. The BBC are incredibly sh*t when it comes to reporting science, as a general rule. (The YouTube blogger I posted links to elsewhere, Miles Powers, has taken them to task for histrionic horsecrap posing as science reporting.) Newtonian physics does not require any modifications whatsoever. There is sufficient energy in each system, and sufficient explanation by way of leverage, torque conversion, and transfer of momentum, to explain all of the physical events that occurred on 9/11. (I am not very good at the areas of… Read more »
To my mind, the biggest problem about the Harrit et al. study of the WTC dust is that it has not been replicated but studiously ignored. It’s not that it was shoddy work or that it was not peer reviewed or improperly published or published by a disreputable publisher, and so on. In fact, it has nothing at all to do with the work as such. The failure is that of the academic community as a whole, purely and simply, that is to say, that in particular the university chemistry departments the world over haven’t risen to the challenge of verifying the work, either demonstrating the veracity of its results or proving them false or inconsistent, which for technical reasons they might well be, albeit unlikely. The paper was published in 2009 and apparently circulated broadly. There has been no response but a deafening silence. To my mind, this is… Read more »
To my mind the greatest controversy is why Harrit and Jones keep wanting to keep things private, will not release critical data, and will not share samples or respond to valid criticism.
It is like they are afraid to prove their claims, this is very unusual for someone wanting truth.
Why isn’t Hulsey keeping his promises?
What happened to Mark Basile?
Why do researchers into these chips take money and do nothing with it?
I made an chamber to do inert gas testing from an old propane tank, charged it with argon, and ignited an energetic paint chip, produced from aluminum cutting dust and red paint.
Why can’t these supposed experts do at least that?
Carroll,
Apart from James Millette, who for obvious reasons isn’t qualified to recapitulate the Harrit et al. experiments, due to his obvious conflicts of interest, who among highly credentialed and “independent” researchers has offered to replicate the study? Please, if you know of any, cite sources!
Remind me again of the promise Hulsey made but isn’t keeping . . .
As for your other questions, they’re kind of leading and so I will simply ignore them.
Millete contacted Jones & Harrit asking for samples as did other researchers they were refused.
Complete open ness and timely updates.
Tell me why have no inert gas tests to determine if the material was self oxidizing, fuel and oxydizer been done seeing they are so simple?
Why is there no valid evidence of aluminum, Jones’s quote about amorphous Aluminum do not make since since he links, a site on Aluminum oxide buliet proof glass?
In fact the only Amorphous forms of Aluminum are oxides of aluminum, one well known one is the black prince ruby in the crown of England?
Why doesn’t the science add up, why isn’t the case conclusively made, by those claiming thermite?
Carroll,
Why do you not answer my questions?
Who in the universe of chemists with a PhD, other than Dr. James Millette, has approached the Harrit team to replicate their work in good faith? Who are the other researchers who made the offer? Do they have names? Where is the documentation attesting to their overtures? If the Harrit team declined to collaborate with them, what reasons were they given? Is any of this in writing and verifiable? I keep asking for citations, but you are not very forthcoming, are you?
What promise has Leroy Hulsey made that he has now broken?
Hulsey promised open, ness, and timely updates along with wanting public input, both Oystein and I applied filled out the online form and nothing happened. http://www.internationalskeptics.com/forums/showthread.php?t=311698&page=2 Column kicking do to spreading debris inside of the facade wall could very well be what occurred at building 7, and the facade landed on top. Indicating the inside was hulled out. The other researchers into the red gray chips will take some time, I remember there were two independent researchers, who wanted to look into it but were refused samples. Repeating the flawed study of Jones & Harrit is not nessisary, simply proving self oxidation, and aluminum fuel would prove the chips are Aluminothermic. Igniting chips in air proves nothing. I will have to look though my old email conversations to find the names of the chemists that requested samples. This subject didn’t interest me for years because of the low ignition and… Read more »
“I have forgotten more about Jones & Harrit than most people know.”
Indeed you have, to the point of now only being able to utter vague and pointless and unsubstantiated generalities and platitudes. And then you and your colleagues are piqued that a team like Hulsey et al. would altogether ignore you and your “recommendations” as to what and how to investigate by way of modeling the WTC7 collapse.
To a man, skeptical geniuses all, unrecognized by the world, eh.
Consider this, however, if you haven’t already: it happens that sometimes genius is unrecognized for a reason. Sometimes, being a tad too self-congratulating, genius has recognized itself a bit too well, eh.
Have you been researching this since 2005, when you talked directly to Jones on June 9th of that year, and have you spent thousands on your own research? Excuses can be made for flawed science, but that does not make the flaws science or truth. Excuses for not doing accurate testing and research are just worthless excuses. Jones & Harrit are full of excuses for this or that, not full of dirrect and truthful answers. When Millete didn’t find elemental Aluminum in the FTIR, Jones and Harrit made excuses as to why. Millete followed standard procedures for finding the fuel in thermite Elemental Aluminum, Jones and Farrer also couldn’t find Aluminum in an FTIR what is the point in a thermite with no fuel other than carbon? I have investigated this as far as I could, Jones& Harrit, look like people simply to vain to admit they were wrong and… Read more »
Who hurt you, Carroll? Let it go. You are the bigger man in all of this. Know it in your heart and therein find your peace and solace. That the world doesn’t understand you isn’t your fault. You are right, and they are wrong, you are the truth, and they are falsehood. Now go and get yourself some well deserved sleep and try not to think too much about all the many thousands of dollars you spent on all of your own research.
In Jones’s own words,
“I encourage you to do TEM analysis as we have done. Studying electron-diffraction patterns obtained with the TEM, Dr. Farrer found that that the iron-oxide was in the form Fe2O3. He did not see a pattern demonstrating that aluminum was in a form he recognized by this method, which surprised us. There are possible explanations for this; see for example http://www.tms.org/pubs/journals/jom/0203/perepezko-0203.html . I’ll leave it at that for now. I have encouraged Dr. Farrer to write up and publish his TEM findings. Did Millette see an electron diffraction pattern demonstrating that aluminum occurs in the form of kaolinite? His report does state”
Thermite with Aluminum Oxide as fuel how powerful would already Oxidized Aluminum be?
I don’t get why you say that Millette had a conflict of interest? It’s not obvious to me. I know he, the manager of an independent lab, had previously been retained by the EPA and/or other researchers to participate in studies of WTC dust. In my mind, this constitutes no conflict of interest. These previous studies had nothing to do with the question of whether or not there is evidence of CD in the dust. These studies were concerned with environmental issues. I think his having studied this dust before and knowing its general properties, and his having dust samples in the first place, qualifies him more than similar labs that do not have these experiences and resources. Millette’s interest is mainly in conducting and finishing proper studies. Reputation is a highly important asset. Beware of “Poisoning the Well”. Millette published a lot, if not all, of his data, his… Read more »
Let’s see: if anyone high up in the chain of command of the Bush administration had anything at all to do with 9/11, then clearly they would have set out the remit for the investigation of 9/11, biasing the outcome of all official and government investigations from the get-go. Everyone involved in positions of investigative oversight would have understood that investigating for the possibility of “explosives” was strictly off limits, in no way part of their assigned remit. Since Millette was one of the lead chemists investigating the WTC dust, he would have had a firm grasp of that remit, eh. Furthermore, it’s not as if Millette was ever accused of being part of a scientifically fraudulent misrepresentation of the characteristics of the WTC dust, eh.
But you don’t see where there might be a problem? Really?
“if anyone high up in the chain of command of the Bush administration had anything at all to do with 9/11…”
That’s Begging the Question – a logical fallacy.
What if Harrit et al were payed agents by … (Saudi Arabia, Putin, aliens, the Illuminati, Mossad, …)? You’d protest right away that I were poisoning the well – and you’d be absolutely right, and yet that’s what you are doing.
Thanks for not explaining objectively why Millette endures a conflict of interest. Apparently, there is none.
Maybe you can do better – have a try, but I’ll go to bed.
Well, if Harrit et al. are the kind of paid agents that you suggest they are, and their study is crap, shouldn’t a properly conducted replication and verification of the study show that the study is crap?
As for the Bush administration being the Bush administration, I think it is safe to say that it was the Bush administration, don’t you?
In what sense is it to beg the question to declare that “IF” those who commission an investigation into a crime AND control the remit of that investigation were party to the crime, it might just be that they would steer the investigation in such a way to avoid incriminating themselves. No?
“Well, if Harrit et al. are the kind of paid agents that you suggest they are, ” …then that would commit the fallacy of Begging the Question, which I asked you to avoid. I did not actually suggest they are paid agents, I merely explained a concept to you with a fictitious example. Apparently, this flew over your head. “and [if] their study is crap, shouldn’t a properly conducted replication and verification of the study show that the study is crap?” Haha no! Why?? If a study is crap, no wise man would waste a second replicating it! Why? It’s crap as it is! Only good studies are worth replicating. “In what sense is it to beg the question to declare that “IF” those who commission an investigation into a crime …” Wowowooooo!! Waitaminute!! That was not what you wrote! You actually wrote: “if anyone high up in the chain… Read more »
If words have any meaning, my dear Oynstein, then the word “IF” most certainly does, eh.
“Wowowooooo!! Waitaminute!!” — indeed, eh, Oynstein.
A commenter by the name of Jerome writes: (The fact that the editor of the journal it was published in resigned over this, citing that she was effectively side-stepped, is also not a good sign.http://www.internationalskeptics.com/forums/showthread.php?t=141353 ) https://off-guardian.org/2016/09/25/jones-harrit-mohr-millette-the-red-gray-chips/comment-page-1/#comment-42874 About that resignation, Niels Harrit writes: Extended quote begins: After the paper entitled “Active Thermitic Material Discovered in Dust from the 9/11 World Trade Center Catastrophe,” which I along with eight colleagues co-authored, was published in the Open Chemical Physics Journal, its editor-in-chief, Professor Marie-Paule Pileni, abruptly resigned. It has been suggested that this resignation casts doubt on the scientific soundness of our paper. However, Professor Pileni did the only thing she could do, if she wanted to save her career. After resigning, she did not criticize our paper. Rather, she said that she could not read and evaluate it, because, she claimed, it lies outside the areas of her expertise. But that… Read more »
That is what your ‘truther’ ringleaders write, by way of attempted ‘damage control’. Here is what Pileni herself is reported to have said: It created a great attention, surprise and suspicion when the Open Chemical Physics Journal in April published a scientific article on remains of nanothermite which were found in great amounts in the dust from the WTC. One those most surprised is apparently the editor in chief of the journal. Professor Marie-Paule Pileni first heard about he article when videnskab.dk wrote to her to ask for her professional assessment of the article’s content. The e-mail got her to immediately close the door to the journal. “I resign as the editor in chief”, was the abrupt answer in an email to videnskab.dk PRINTED WITHOUT PERMISSION A telephone call reveals that editor in chief Marie-Paule Pileni had never been informed that the article was going to be published in The… Read more »
Censorship is a fact of life in our post-9/11 proto-fascist states. If you want to claim that 9/11 is some exception to the rule and that here only rational judgements of credibility ad public good hold sway then you can do so elsewhere.
If the Harrit et al paper was poor enough to warrant a resignation by an editor one might have expected it to have been rebutted, not to say shredded, in an official peer-reviewed reply by now (seven years later).
In any case this thread is for discussing the science of the Harrit et al paper. Not for fruitless speculation about human motivation. So, try to remain focused on the former
If this conversation is on science then the papers on Areojel and other thermite should be shown, listed and compared to the Harrit and Jones paper and the glowing errors shown. Low burn rate, of Aluminum platelets, vs high burn rate of nano spherical aluminum. Especially when compared with copper oxide nano rod thermite. Failure to release promised data, FTIR from BYU. Shock and heat sensitivity, The type of thermite supposed to be found is the worst that could possibly have been used it makes good fire works, gun primers, and electric matches but is poor at anything else. No coherent theory of how it could have harmed the building. The DSC has To high an energy spike indicating a fast reaction of carbon is the main fuel source. That would be a waste of energy. And again it was not proven that self oxidation occurred or will occur under… Read more »
There seems to be an assertion ‘out there’ among the ‘truther’ blogs that this is evidence of some form of super-thermite that is both high-explosive and a source of heat. (That these aspects tend to contradict doesn’t seem to matter.)
I can’t find anything specific on what it is supposed to be. ‘Woo’ would be my estimation.
Formulation and Performance of Novel Energetic Nanocomposites and Gas Generators Prepared by Sol-Gel Methods – Lawrence Livermore National Laboratory
https://e-reports-ext.llnl.gov › pdf
by BJ Clapsaddle – 2005 – Cited by 12 – Related articles
Mar 25, 2005 – nanostructured metal oxide matrix, energetic materials based on thermite reactions can be … energetic materials has remained either the physical mixing of solid oxidizers and fuels (e.g. black powder),.
If you want to learn more research Aluminum fuels or areogel thermites.
There is a great European Journal on the issue.
@ Jerome Fryer
Highly reactive nano-composites are not woo. Maybe just accept this as a slightly complex and convoluted discussion of science and stop begging for permission to sneer. This isn’t the ISF. We’re grown-ups.
What Carroll is referring to is not thermite, nor ‘nano-thermite’, as the Harrit paper describes the material.
The paper from Lawrence Livermore Laboratories refers to ‘novel’ (meaning new, in 2005) processes to produce explosive incendiary materials. These seem to be easily discerned from use of a TEM.
If I recall correctly, one of Jones’ colleagues in the ‘truther’ cause was going to do some work with a TEM to verify the Harrit et al claims about the materials they identified as “thermitic”. No confirmation seems to have been forthcoming — were the tests done?
Carroll may know more, and can correct me if I am misunderstanding this.
Any mixture of nano Aluminum fuel, and nano metallic oxide Oxidizer is nano thermite.
Any mixture of nano thermite with organic carbon binder is Areojel nano thermite.
Farrer did a TEM scan which was never released to the public, Jones did comment that the scan disproved nano thermite in the red gray chips because of no elemental Aluminum fuel. [citation needed – OffG ed]
That backs up Millete’s claim that he couldn’t find nano Aluminum fuel either.
No proof of nano Aluminum means the chips are nothing more than epoxy based red paint.
Anyone actually interested in this debate should read this article.
“Nanoscale Aluminum – Metal Oxide (Thermite) Reactions for Application in Energetic Materials Introduction
http://www.ipo.waw.pl › cejem › full › Klapotke
by DG PIERCEY – 2010 – Cited by 51 – Related articles
Central European Journal of Energetic Materials, 2010, 7(2), 115-129. ISSN 1733- 7178. Nanoscale Aluminum – Metal Oxide (Thermite) Reactions for …,”
Here is the conversation Jones published at 9/11 Bloger.http://911blogger.com/news/2009-05-14/steven-jones-and-frank-greening-and-others-correspond-april-may-2009
Note I was not a part of that conversation as I already concluded Jones’s methodology was flawed, basicly ignition and nano sphere = thermite/thermite.
A conclusion I knew from experimentation was not correct.
And after a hearty laugh, I came to the realization that maybe there is something to what Carrol Sanders is saying, after all, about how nano-sized iron spherules may be formed. So I sort of had a look and a came upon this: Source of what follows: https://www.metabunk.org/debunked-iron-microspheres-in-9-11-wtc-dust-as-evidence-for-thermite.t2523/ Quote begins: The same RJ Lee who also says the spheres would have been formed in the WTC fires. Something that AE911 seriously misrepresented: [ . . .] Content from external source Substantial quantities of previously molten iron spheres, up to 150 times the background level of iron in dust from other buildings in the area, were found and documented by the US Geological Survey (USGS) and The RJ Lee Group (RJ Lee). RJ Lee found the microspheres in amounts up to 6% inside the skyscraper across the street from WTC 2. Other scientists estimate a total of 10-100 tons of microspheres… Read more »
Correction to the foregoing:
A link that works for those who may want to acquaint themselves with the RJ Lee literature on the matter at hand, a link to a .pdf document:
http://911research.wtc7.net/essays/thermite/cache/nyenvirolaw_WTCDustSignatureCompositionAndMorphology.pdf
Burning Coal forms microspheres usually FeO, or Fe3O4 from pyrites and other sulfides combusting in the coal.
It would not be a similar reaction to the world trade center fires.
Municipal waste incinerators form microspheres at lower temperatures from finely divided iron, and, or reduction of Iron oxide into iron. They burn roughly at the temperatures found in the world trade center fires.
I’m really starting to like these JREF(-ers). They do lighten my day with much boisterous and heartfelt laughter: Carrol Sanders: “How many of the spheres do you want, I sent several to Jones personally in 2006-7. He [Steven Jones] admitted iron spheres could be produced at lower temperatures. [citation needed – OffG ed] They are common pollution. Jerome Fryer: “If you can back up your citation of Jones’ conceding that point that would probably be useful. (Email or whatever.)” Carro Sanders: I took part in that debate [in which Jones made the admission] and have all the Emails saved. I have said I would not release them publicly but I have shown it upon request to private individuals who signed a non disclosure (sic) document. A contract stating they would not release the actual emails to the public. I view them solely as historical documents not to be released Until… Read more »
I asked if this could be confirmed. Carroll has replied with, in effect, that it can’t.
Maybe you should go ask Jones?
If “Carroll” claims he has agreed not to release the email he should not make claims based upon what they allegedly say. No part of his claims can be verified so should not be made.
Harrit et al can’t back up their paper, apparently.
This doesn’t appear to rule that out from being discussed here.
Carroll’s claim has to be considered his opinion, as it is unverifiable. Unless Jones wishes to verify or dispute that assertion. If someone asks, then we may find out.
If you think it’s worthwhile why don’t you ask Jones yourself.
What do you mean “back up their paper”, though? Unless or until a rebuttal is published in a peer-reviewed journal there is nothing required of Harrit et al beyond standing by their research. If their science is as easily refuted as many informally claim, then where are the published rebuttals? Even Mohr/Millette, who were promising to publish their alleged primer paint findings in a peer-reviewed journal four years ago, have yet to do so.
No an Idea a hypothesis is only worthy if it is correct the burden of proof is still on Harrit and Jones.
Publication does not change that fact, trying to reverse the burden of proof is never science.
Where is the FTIR result showing elemental Aluminum fuel from BYU that was promised?
Jones and Harrit did not release them because they directly contradict the thermite paper.
Self oxidation would go a long way to proving an aluminothermic reaction but the Appropriate tests were not done.
That in itself is fishy why didn’t the Authors of the paper do the easiest and most efficient test?
I have no problems with any scientific enquiry into 9/11/2001, I just do not like Invalid claims poisoning the well, for people who want to do real research.
I entirely support that POV
Introducing The Blue Logo Plane
This is worth a quick read: http://ronmossad.blogspot.com/2009/04/final-word-on-niels-harrit-nanothermite.html Even if you don’t like what this guy says, check out the comment by “wardogs” below the main article. It concerns the bomb-sniffing dogs that were present at the WTC, the time required to install controlled demolition charges, and some points about the debris from the towers. No explosives or incendiary devices were planted anywhere in that complex. None. Our dogs and the other EDD K9’s would have alerted after the fact as well. It’s what they are trained for. We staged for the two weeks we were there at the Fresh Kills landfill on Staten Island. This is where much of the structural steel was brought. Despite rumors to the contrary, chain of custody was maintained and virtually all of the steel was cataloged and vital pieces were inspected. Not a single dog ever alerted to the presence of either explosives or… Read more »
who cares about the dogs? small details, obsessing over gnats while everyone swallows the camel.
This is off-topic to the subject of Jones-Harrit Mohr.
Do you understand that the dogs were trained to detect bomb materials, and the residue from the same?
It is entirely pertinent to the claims of explosives.
Were the dogs ‘in on the conspiracy’? Unlikely. You’d have to broaden it out to encompass the police teams handling the dogs, and anyone who noted that it was odd how the dogs were barking at the shadowy government agents transporting tonnes of stuff into the buildings. (Then subsequently ‘covering up’ at the site where the debris was moved.)
Here Are two parts from a longer ‘debunking’ series. This, along with part 3, covers thermite, thermate, etc. and the Harrit et al paper.
(Part 2)
https://youtu.be/wbjYoINw5oI
(Part 3)
https://youtu.be/ymFYBijuqJw
JeromeFryer – let’s have rational, scientific rebuttals rather than sophomoric videos with painful soundtracks.
It contains a rebuttal to the thermite / thermate claim from a chemist, and is simple enough to follow without requiring any initial understanding.
Pretty sure that the author / creator of the video is working on his PhD. (Unless he completed it by now. This series is from a while back.)
Can anyone explain how on 9/11, WTC 6 exploded, sending building chunks hundreds of feet into the sky? WTC 6 had not been hit by a passenger jet, nor was it on fire, yet it exploded? Before the smoke had cleared from around the stricken South Tower, a mysterious explosion shot 550 feet into the air above the U.S. Customs House at 6 World Trade Center. This unexplained blast at the Customs House has never been investigated or reported in the mainstream media. http://whale.to/a/bollyn02july10.html Could thermite be used to weaken the target building’s steel beam, then some sort of device used to explode WTC 6 into a hollow shell? Ground Zero EMT: ” I tried to run into the lobby of 6 World Trade, but there were federal police… standing in the open doorways. As I tried to run in, they wouldn’t let me, waving me out, telling me “you… Read more »
Read this, Greg:
http://911review.com/errors/wtc/b6_explosion.html
This final point is the ‘nail in the coffin’ for the explosion claim:
Wouldn’t have been the nitro cellulose, cordite from the shooting gallery in the basement, we all know that thousands of rounds of police practice ammo and reloading supplies, would never explode.
Check the link I posted above. An explosion from within the building would have produced ejecta radiating outward, whereas the building was full of debris from the tower collapse.
(Also, the Windows would have blown out, rather than the roof. The roof being caved in is a fairly good sign that debris from the tower above came down through it. Many smaller buildings were destroyed by the tower collapses, but that gets overlooked in the bun-fight over WTC 7.)
Their is a Clear 9/11 nuclear signature @ BRNJ seismographic station.. The only other seismographic station was @ PAL while all other were turned OFF. Central Park seismographic We also have Pyrotechnical Confession by 9/11 Insiders.. Uranium and Tritium ..
The vibrations were picked up on Fordham’s seismometer. Its readings are displayed on a computer in a storage room of Freeman Hall and then relayed over the Internet.. What did these reading say about 9/11?
http://911truthout.blogspot.com/2016/09/pyrotechnical-confession-and-world.html
Do you have any documented proof of neutron activation either on the day or anytime after? Yes or no? If you do, please cite the source. Otherwise your so called signatures are consistent with non-nuclear kinds of explosions.
Here is a fairly comprehensive refutation of the mini-nukes hypothesis:
http://www.journalof911studies.com/letters/a/Hard-Evidence-Rebudiates-the-Hypothesis-that-Mini-Nukes-were-used-on-the-wtc-towers-by-steven-jones.pdf
“Hard Evidence Repudiates the Hypothesis that Mini-Nukes Were Used on the WTC Towers,” by DR.Steven E. Jones.
Some nanothermite may have been used such as to cut out shapes of aircraft in the building or more broadly so as to confuse subsequent investigations or what is in fact being witnessed is conventional sciences attempts to categorise tests and explain results according to a series of principles usurped by the use of black technology the outcomes of which are currently unknown except as ultrasecret. This doesnt makes Harrit dishonest or mistaken.It just makes his analysis taken in the context of the narrowness of the current debate here of little evidential value. Similarly, there is a clear nuclear signature to these events but one also of low radioactivity producing cool dust which as one would anticipate is equally difficult to fully rationalise outside the use of a hitherto unseen black technology though admittedly nuclear experts have tried sometimes persuasively to make this case (but omit key evidence imo)…..
Nonsense, bill.
There is ‘no clear nuclear signature’…. half of Manhattan would have been down with identifiable radiation sickness, in that case.
*Read this: *
Hard evidence repudiates the hypothesis that ‘nukes’ were used on WTC Towers / Steven Jones
http://www.journalof911studies.com/letters/a/Hard-Evidence-Rebudiates-the-Hypothesis-that-Mini-Nukes-were-used-on-the-wtc-towers-by-steven-jones.pdf
Clear 9/11 nuclear signature @ BRNJ seismographic station.. We also have Pyrotechnical Confession by 9/11 Insiders.. Uranium and Tritium ..
http://911truthout.blogspot.com/2016/09/pyrotechnical-confession-and-world.html
Whether thermite or nano-thermite was used is of course of interest. But it is not crucial to determining the primary issue: whether what happened on 9/11 was “an unexpected attack from outside” or an “inside job”, prepared well in advance. What precisely caused the Twin Towers – and WTC7 – to collapse is secondary. It should be clear to any educated layman – purely from the visual evidence which shows the towers exploding upwards and outwards, and from the close-to-freefall speed of collapse of all three buildings into their own footprints – that these were not structural collapses, and that therefore the government and NIST were lying. It’s extremely disappointing to see – in an article that presents a scientific, evidence-based approach to the question of thermite – a repetition of the wholly unscientific, evidence-less claim of a “hijacking and crashing of planes”. There were no hijackings on 9/11 (except… Read more »
What is your hypothesis? You’re asserting that there were no aircraft? No hijackings?
Just a reminder to keep the discussion to the science of the building collapses. No discussion of “no-planes” or “no-hijackers” on this thread please.
paulcarline – on your first point, I agree.
What caused the three towers to crush themselves down through the path of greatest resistance is of secondary importance.
The visual evidence, observed with a stop-watch in hand to record the rapidity of the events, is all one needs to see (with one’s own eyes) that the govt and NIST are lying. We don’t need rocket scientists to tell us this.
Regarding your second point, I totally disagree. There is no hard evidence to back up your nonsense statements about ‘no hijackings’, ‘no crashing planes’ – tropes favoured by trolls who’ve plagued these discussions over the last decade.
Since the editors have now asked commenters to keep this thread clear of discussion on any other topic other than the issue of what caused the destruction of the various buildings in the WTC complex, I will take up your challenge in a new thread.
My goodness, all you are saying is that NID_ST ar either a bunch of incompetents or outright traitors. I know where I place them and its a place they will cool their heels in for decades.
Since someone has already begun a slanted campaign in favor of Mohr’s oft-EPA-commissioned champion, Jim Millette, merely to set the record straight, that there is indeed a strong affiliation between the EPA and Mohr’s so “independent” champion: “. . .it appears that Millette will begin to report his new findings for the “skeptic” Mohr next week, at a conference in Atlanta. It will be interesting to see if Millette will now report the abundant iron spheres, which all other scientists have seen in almost every sample. The fact that he has worked for years on federal contracts for NIST and the Bush Department of Justice, since 9/11, makes that seem unlikely. As for the possibility of Millette confirming the presence of thermitic materials in the WTC dust, which would indict his own previous work, we probably shouldn’t hold our breath.” https://digwithin.net/2012/02/17/when-mohr-is-less-the-official-non-response-to-energetic-materials-at-the-wtc/ “When Mohr is Less: The Official Non-response to Energetic… Read more »
You’d rather push the ‘conspiracy bubble’ out wider, than discuss what we have in terms of physical evidence and testing?
Are foreign concerns, such as Arup, also part of the conspiracy?
http://911-engineers.blogspot.com/2007/04/dr-barbara-lane.html
NOTE FROM ADMIN: the Arup study has already been extensively debated. It does not discuss the plausibility of fire-induced collapse per se, but merely the question of how effective the insulation may have been. It does not relate in any way to the red-gray chips, which is the focus of this discussion. Do NOT attempt to dilute or divert this discussion by rehashing old subjects.
No discussions of “conspiracy theories” here please. This thread is concerned with the red-gray chips and related matters.
Do NOT reply to this comment.
Incorrect about the Arup connection. From the article I linked to above: Quantifying the performance of the structure in real fire scenarios is key in designing structures to withstand progressive collapse. For several years, Arup has been working with the University of Edinburgh to model the performance of structural frames in realistic building fires using finite-element analysis. This approach has been used by Arup to model a building with very similar structural design and fire characteristics to WTC Tower 1. Arup’s analysis concluded that the effect of thermal expansion on the perimeter columns of the towers—even without the airplane impact—could have led to collapse due to the severity of fire occurring on multiple floors and the resulting thermal expansion of structural elements, particularly the floor systems. The Arup analysis conclusively illustrates that even with code-approved fire protection, a severe fire—without aircraft impact—could still lead to collapse. (Emphasis mine.) Arup thus… Read more »
“Arup thus agree with the NIST conclusion that fire was responsible.” But they do not agree with NIST. In fact NIST do not say how the towers actually collapsed,they avoid that troublesome problem by placing it outside the scope of their investigation, and merely say that “global collapse” was “inevitable” after the “initiation of collapse.” This “initiation of collapse” was due, they say, to the aircraft impacts dislodging the insulation from the steel, and the exposed steel succumbed to the fires. Sagging trusses pulled in portions of the perimeter walls, causing a rapid spread of “column instability” in perimeter columns, which in turned strained the fire-weakened core columns. The “tremendous energy” of the floors above the collapse zone led to “global collapse.” Arup do not agree with this scenario. They say: “The basis of NIST’s collapse theory is… column behaviour in fire… However, we believe that a considerable difference in… Read more »
The difference between NIST and Arup is that Arup believe a fire of that scale alone could have brought the towers down.
You can’t quote-mine your way around that. You have to falsify both the NIST and Arup conclusions, because neither involve explosives of any sort.
There you go again with that very smelly red herring – it’s getting quite putrid now. And I think I will ‘quote-mine’ a little here, by quoting myself, from part of my comment above – the section which you choose to deliberately ignore: “… all of this is … another dose of obscurantist nonsense, because neither NIST or Arup address the very real problem of finding an explanation which accounts for all the observed facts. Including: very high temperatures which persisted for weeks … [plus numerous other examples of ignored factors] … etc, etc.” And: “None of these effects can be explained by fire alone but they can all be explained by the use of explosives and incendiaries like nanothermite.” A rational and scientific explanation for what happened must explain all the observed facts – if you cannot agree with that basic principle then there is little point in trying… Read more »
Your assertion that you need “explosives and incendiaries” is not borne out by the evidence.
High temperatures, persisting for weeks, are not that surprising. A much smaller building (seven floors) that collapsed totally in the city where I live burned for several days with temperatures high enough to destroy most human remains that were within the rubble. This was with firefighters pouring water constantly onto the debris. (It collapsed due to earthquake, then the debris caught fire.)
A building thirty times taller has far more potential energy present, plus a fuel-laden 767 was slammed into it.
The observed facts are fully explicable, which is where both NIST and Arup agree.
Thank you for the edits, Admin!
This is a report from R J Lee. It is a “Dust Signature Report”, used to prove that materials from the WTC tower collapse entered a building. (Insurance claim supporting material, by the look of it.)
http://911research.wtc7.net/essays/thermite/cache/nyenvirolaw_WTCDustSignatureCompositionAndMorphology.pdf
If “thermitic material” was present, then it should be in evidence in reports such as this.
Your assumption that the RJ Lee investigation (or the USGS investigation, which you fail to mention) would have identified any present nanothermite is erroneous. Although containing some nice detail, they are not comprehensive studies by any means. But more to the point, any red-grey chips present in their samples could quite easily have been mistaken for paint and disregarded upon initial visual inspection, especially if they had no notion to suspect otherwise. Indeed, the RJ Lee report you link to mentions finding “other particle types” in section 2.4, but does not elaborate in any detail. Furthermore, Steven Jones himself has stated that upon first inspection of the dust he also assumed the chips to be paint, and only through delving deeper than simple visual analysis did he discover otherwise. In broader terms, you also are ignoring the evidence (including that provided by the RJ Lee and USGS studies) of extremely… Read more »
The presence of “spherical particles of iron” is mentioned on page 5 of the R J Lee document. Figures are on pages 17 and 18. Harrit et al does not mention paint chips at all, however Millette found only paint chips (that had been subjected to heat). So Harrit found (only?) “thermitic material” while Millette found only paint chips. It appears that Harrit has subsequently muddied the waters around this point, by claiming that only some of the “red/gray” chips were found to be “thermitic material”. Why no distinction was made in his paper is unresolved. [citation needed – OffG ed] Here is a fairly accessible criticism of the Harrit et al paper: http://11-settembre.blogspot.com/2009/04/active-thermitic-material-claimed-in.html I am not ignoring the subject of the extreme heat produced. “Office fires” can account for the high temperatures required to produce the iron spheres found. The NIST report found temperatures in excess of 1000 degrees… Read more »
Iron melts at 1500C. Lead boils at 1700C. Office fires will never be able to account for such temps.
Plus what happened to create the “spray” of molten iron that solidified into those ubiquitous iron spheres?
This is proof – as we keep saying – there was more going on in the fire than simple office furniture burning in air, “weakening” steel.
NIST has not explained any of these anomalies. All it’s done is fiddle with the thermal conductivity of its models to try and create enough heat to do the “weakening”. Even that could not account for the allegedly molten and vaporised metals, so it simply ignored them, even though the USGS, FEMA and the study you
And this is why we need a new investigation.
“Iron melts at 1500C.”
Did you ever do that experiment at school where you set steel wool on fire using a lighter?
Here is an experiment to see if you can create those iron spheres: “Burning Painted Steel Beams, Making Iron-Rich Microspheres!”
http://www.internationalskeptics.com/forums/showthread.php?t=264234
You keep repeating the ‘need a new investigation’ mantra.
By whom?
Who do you consider qualified to perform a new investigation into the physical events?
Compare the spectra graph. They are not in any wise the same. The “spheres” found by the ISF experiment are very different in composition. Look at the quantity of “spheres”. Look at their locations.
If the ones in the WTC dust were just a by-product of cool office fires why do you think the USGS and RJ Lee consider them evidence of high temps?
I think a collection of independent scientists and engineers should be convened, and their work should be publicly available from the outset.
It’s not hard.
How do you define “independent”?
Why isn’t the Arup work considered valid?
If there is no ‘need’ for factors such as thermite, how do you expect such an effort to progress? What should they consider, and what should they not?
I think you are looking at this backwards, by assuming that some form of ‘cover up’ has occurred. You can keep reexamining the events forever and get no different conclusion, if the original conclusion was correct. When do ‘truthers’ admit that they have the truth?
The spectra graph is set out differently, but appears very similar to me.
There is also this to review:
http://11-settembre.blogspot.com/2009/04/active-thermitic-material-claimed-in.html
“Thermitic materials” seems a tenuous claim, at best.
The fires exceeded 1000 degC for fifteen to twenty minutes, which should be adequate to produce enough heating of steel materials such that when the collapse occurred you get a lot of partly burned paint chips and other small pieces of ejecta in the dust. Millette identified paint chips in his report, while Harrit later stated that there were paint chips in his sample too.
RJ Lee stated why, chimney effect fires with hurricane force winds.
http://i271.photobucket.com/albums/jj132/chainsawprof/rjlee_zpsc4euvv11.jpg
RJ Lee are talking nonsense There is literally no evidence prior to collapse of the raging inferno and huge temps they are describing. There were men in the stairwells and lift shafts of the South Tower right up until the moment the building came down. The fire chief described a fire they could “knock down with two lines.” About ten minutes after he said that the whole damn building came down on his head. How in hell do temps of 1000C max described by NIST vaporise iron? How in hell do low-oxygen black-smoke fires vaporise iron? This Esher-staircase-thinking where each improbability both rests on and contradicts the next in a perfect circle is simply a waste of time. NIST claims fires of 1000C that were somehow able to heat the steel to 600C+. RJ Lee ignore NIST’s claim that the fires only reached 1000C max and describes a Towering Inferno… Read more »
Question: how are the rust flakes converted into elemental iron?
@Jerome Fryer :
Yes, that’s an interesting experiment isn’t it? Can you please clarify what you think it demonstrates. Is it:
1. A phase change or a reaction?
2. If a phase change, describe it.
3. If a reaction, what is it?
4. What is the relevance of that reaction and its products to a discussion of molten iron/steel?
In the interests of an honest and meaningful debate, please restrict your reply to answers to these questions.
The iron in the steel wool oxidises. This is an exothermic reaction (produces heat).
http://chemistry.elmhurst.edu/vchembook/143Afeoxide.html
You appear to be asserting that you cannot produce these tiny iron spheres without having temperatures at the melting point of steel. The experiment I linked to produced such spheres without requiring those temperatures.
@ Jerome Fryer above, re burning of steel wool:
“You appear to be asserting that you cannot produce these tiny iron spheres without having temperatures at the melting point of steel.”
The ‘microspheres’ associated with the oxidation of steel wool are not iron and they’re not really spheres either. They are a type of ‘pseudo-sphere’ which is not round, and has small ‘tails’ or ‘horns’ of oxidised wire tendrils attached. They are also hollow, and are made from iron oxides.
There is no melting involved; instead, localised internal contaminants burn within the wires and form gas which inflates the softened wire to create these hollow, semi-spherical products.
Here is a picture of one made by your ISF associates:
http://www.internationalskeptics.com/forums/showpost.php?p=7671740&postcount=12
and here is a paper describing their formation:
https://www.metabunk.org/attachments/journal-journal-of-fire-sciences-1987-272-pdf.6119/
They are therefore not the same as the spheres found in the WTC dust.
The fires had to be well over 1000c to produce material streaming from the building at 1000c. Thick black smoke is not evidence of fire temperature it is evidence of a refined fuel. Carbon black, that can burn at 1400C in air, and produce no visable flame. It also takes a lot of heat to release that much hydrocarbon black smoke. You have to heat the hydrocarbon plastics to cause pyrosis to carbon black. The fire fighter reached the impact zone by that time the fire would have been well above that zone heading upward. Carbon black deposited on critical bracing in the core leads to bracing failures, that leads to Roosd. Carbon black and carbon monoxide are both low explosives similar to black gun powder. The oxidation of iron, can produce natural iron reduction reactions in a chimney effect fire, those reactions produce microspheres. The evidence suggests a chimney… Read more »
@Jerome Fryer :
It is a fact that in order to produce these small iron-rich spheres the components need to be molten and airborne. Can you please explain how you think that can happen in a wood fuelled fire in a barrel into which a section of steel beam is placed?
My understanding is that the material does not have to be airborne. You can produce these spheres by burning steel wool, for example — they form within the matrix of oxidised iron.
Or though reduction in a reducing environment, especially with carbon monoxide in a gasious flow.
Also don’t forget about natural thermitic reactions.
Natural Contamination,
@ Jerome Fryer :
“You can produce these spheres by burning steel wool, for example — they form within the matrix of oxidised iron.”
No, they don’t. See my reply above about these steel wool spheres. They are not iron but iron oxide and they are not spheres.
If we are to believe the results from the ‘experiment’ that you link to, the most likely explanation is contamination. The experimenters got their steel sample from a scrap yard in which activities which will produce such iron rich spheres are commonplace, such as oxyacetylene cutting of steel objects, etc.
I suppose these guys could have accidentally chucked into the burn barrel some lumps of aluminium and iron oxide which accidentally formed themselves into some ‘natural thermitic’ material which just happened to then ignite, leaving these spheres stuck to the bulk steel. But I really doubt it. Don’t you?
How many of the spheres do you want, I sent several to Jones personally in 2006-7.
He admitted iron spheres could be produced at lower temperatures. [citation needed – OffG ed]
They are common pollution.
If you can back up your citation of Jones’ conceding that point that would probably be useful. (Email or whatever.)
He admitted to Dr. Frank R Greening, in a private email during the microspheres debate in which I took part that iron microspheres, were formed in solid waste incinerators at low temperatures from the paper plastics and finely divided steel.
The incinerators, uses a chimney effect to burn solid waste, they are well known to produce iron rich microspheres.
I took part in that debate and have all the Emails saved.
I have said I would not release them publicly but I have shown it upon request to private individuals who signed a non disclosure document.
A contract stating they would not release the actual emails to the public.
I view them solely as historical documents not to be released
Until after the parties involved are deceased.
Reduction and air flow.
They do not have to be molten, just chemically reduced, at low temperatures.
Fe 2O3 to FeO.
By carbon reduction.
“Investigations of the small-scale thermal behavior of sol-gel thermites – Sandia National Laboratories
Sandia National Laboratories (.gov) › prod › …
by AS Tappan – Related articles
Ignition (in air) behavior of sol-gel thermite as a result of different final activation (in argon) temperatures. …. material, 2) this phenomenon is not observed for nano-Fe2O3 in the absence of organic impurities, 3) self-.”
As you understand the chemistry, could you place an initial post under this article? A simple outlining of why thermitic material isn’t likely to be what Harrit found could be useful.
My understanding (which could be totally wrong) is that there should be other compounds present (barium-nitride?) if thermite was used.
You think low temp chem reduction will vaporise iron?
And lead?
What are you quoting? And why are you reffing the behaviour of sol-gel thermites?
You know, Jerome, I could take the time and effort to refute each and every one of your arguments and assertions made thus far in this article’s comments, but I won’t. Why? Because from reading your contributions on this page, as well as on all the others concerning 9/11 on this site, it is abundantly clear your have no interest in conducting anything resembling an honest and holistic discussion, preferring instead to endlessly dissemble and obfuscate. Furthermore, I have serious doubts you possess the technical competence to address the subject of this particular article, as apparently you do not even comprehend the distinction between the combustion of a material and its melting.
In short, I anticipate any further overtures on my part would be futile, and I refuse to waste my time thus.
Regards,
SB
If you believe that you have something useful to add then post it in a top-level comment.
You need not engage me if you choose not to (for whatever reason).
How doe thermite explain the effects better than the chemical effects as a result of a huge Chimney effect fire? Seem someone needs to do his homework. Jones never could do accurate experiments, he never tried to duplicate the unique chemical or physical conditions of a chimney effect fire with refined fuels inducing a complex set of oxidation and reduction reactions. He never looked for natural causes for the supposed evidence he presented. Why would paint not be contaminated with aluminum during construction? Why wasn’t the unusual mushroomed shape of thermite cut loaded steel observed in the rubble pile? Why should anyone consider these theories anything but the product of lack of knowledge? Why do you believe rapid connection failure would be unusual under the conditions observed as mass accumulated, mometum increased, while resistance energy was individual to each independent connection? I mean is the sole purpose of these articles… Read more »
Yes.
Are you laughing with her, though, Norman?
(Not that I want to get all ‘conspiratorial’ — but I still don’t put know who came up with the idea to run a series of ‘truther’-biased 9/11 articles.)
I just realised that Carroll is the Irish name (masculine) rather than the shortened form for ‘Caroline’.
(I may be spending too much time on this stuff…)
It is actually Roman, Latin originally Carrollous meaning a large and powerful man it is several centuries old family name.
Yes, I looked it up when my ‘you’re assuming something here’ alarm was triggered, along with ‘Isn’t that a name you’ve seen attached to Irish men before?’
Sorry for the dumb assumption!
(My own name, being very unusual in New Zealand when I grew up, was always mispronounced as ‘Jeremy’ — but the assumption of sex was always correct.)
The major problem with the huge chimney fire is there was no huge chimney fire.
Look at the evidence. All of it. Watch the video. Read the firefighter testimony. Read NIST.
Firefighters were in the elevators and walking up the stairwells right up to the moment the South Tower (WTC2) came down.. Therefore they were not acting like huge chimneys helping to generate temps high enough to vaporise iron and lead.
The twin towers were smoking black and exhibiting signs the fires were dying back due to low oxygen.
The only fire the fire chief of Ladder Seven described prior to the collapse was a relatively contained small one they could “knock down with two lines.”
The claim of the towers acting like huge chimneys creating blast-furnace type temps is simply negated by every piece of known data.
Not so , oil well fires produce tons of black smoke because they are fuel rich not oxygen deprived,
How Was I able to walk myself within 15 feet of a chimney effect fire, 1400C?
Air currects in fires can produce cool and hot zones at the same time.
A three story chimney effect in the upper block where the firefighters never reached would have been deviating to the bracing in the core.
Loss of bracing leads to column movement and weld failure do to slinderness.
Jones & Harrit and their supporters are often guilty of massive over simplification.
Fuel rich. Cool and hot zones. Deviating to the bracing in the core. Slinderness. Massive over simplifications.
Got it!
Except for the molten steel that proves that the towers became blast furnaces burning so hot that you could not see the flames. (I’m being facetious, of course.) Clearly, Sanders understands the world at a level that you will never be able to reach, my dear moriarty, so long as you allow yourself to remain constrained by ‘facts’ and ‘reality.’ Carbon black sooty smoke is an indication of hot fires being fueled by the carbon in and from the black sooty smoke, eh. Tut, tut . . . do not protest. It is all in the “reduction,” and thermitic reactions can happen spontaneously, because it happens all the time, don’t you know, on account of “natural contamination;” and elemental iron nano-sized spherules are “a common pollution” and that is doubtlessly why Dr. James Millette fails to mention them at all in any of his conclusions on the WTC dust because… Read more »
That’s because I understand this at a level of someone who actually researched it, the paper from Sandia labs is of a thermite material that accidentally self ignited at 350C when exposed to air.
The ignition was caused by oxidation of Iron reduced by carbon in the drying process used to dry the epoxy in an inert gas environment.
I have since duplicated the process of ignition of aluminum with oxidation of Iron many times.
Interestingly thermite burns at 2565C Aluminum in Gasious oxygen reaches closer to the theoretical 3000C
So a considerable amount of the energy is going into liberation of the oxygen from the oxide.
Of course to reach the highest effective temperature and energy you need gasious oxygen with vaporized aluminum.
“Sandia labs is of a thermite material that accidentally self ignited at 350C when exposed to air.”
Well, there you go, eh, that proves “natural contamination” and that things, even in labs, where mixtures are synthetic and not easily found outside of labs, spontaneously happen all the time.
I was out camping once. Lit a fire. And boom. The very thing you describe here happened. No shit.
Are you sure I find it highly unlikely that you could achieve enough of a reaction to reduce much iron in an oxygenated open simple fire.
Such reactions can only occur in stack, Chimney effects.
The chemical elements will react if the environment for the reaction is produced fore the reaction too occur. Regardless of whether the reaction is from human engineering or natural occurance.
I can easily duplicate complex aluminothermic reactions simply by providing the appropriate environment for the occurance.
That is something Jones failed to do provide the environment for the reactions to occur, his early experiments were childish.
No shit, Sherlock: if conditions for a chemical reaction to take place exist, it will take place.
And you are certainly right: if you provide the appropriate environment for the occurrence, you can indeed replicate any reaction you want, including “complex aluminothermic reactions.” See the previous sentence.
Jones is a duffer, I know. Again you are right.
I do have a question, though, as you write: “The ignition was caused by oxidation of Iron reduced by carbon . .” I mean, I’m no chemist but . . . isn’t it rather something like ‘the reduction of iron oxide by carbon.’
Our friend Mr Sanders here is pretty damn sure that he understands everything that happened on 9/11, and that the other various experts around the world, who are calling for a proper investigation, are all fools and/or frauds who are deliberately misleading everyone who will listen for some unspecified personal gain.
He reckons that pretty much everything that happened can be explained by his ‘flameless’ fires whipped into roaring infernos by a ‘chimney-effect’ which produced ‘hurricane-force’ winds in the building.
I wonder how he explains the lateral, upwards and outwards, high velocity ejection of heavy building components like beams, girders and perimeter wall sections which travelled hundreds of feet. I guess he must think it was those hurricane-force winds which just blew them all out. A kind of chimney-effect big bad wolf, “I’ll huff, and I’ll puff, and I’ll BLOW your tower down!”
I can verify that I took part in the debate on microspheres, and that Steven E. Jones refered to me directly by name.
I said I would not release the Emails however the conclusions reached in the debate, are known to many.
Jones admitted that solid waste incinerators do produce Microspheres at lower temperatures, the temperatures of the World Trade center fires.
Roosd and exterior column peal.
Rapid Open Office Space Destruction induced by floor overloading causing rapid connection failure.
The thermitic material is not claimed to be just there in the dust. It’s allegedly been identified solely in the red grey chips. Unless R J Lee were examining the chips they would not be expected to find thermitic material.
The R J Lee document specificly notes the iron spheres they found. (Above post.)
Yes, and? Are you saying these are thermitic materials?
(hint – they aren’t)
Why no proof of self oxidation in this weak thermite, with low burn rate used in cheap fireworks?
I mean come on Aluminum platelets not nano spheres, of aluminum, or nano rods.
Looks like left over fourth of July dust, cheap and low energy Areojel thermite.
Wouldn’t the R J Lee report control sample have had such contaminants?
Perhaps I didn’t read it closely enough, but it seemed that they identified the iron spheres as part of the WTC ‘signature’.
You need to cite some evidence of that claim before I can comment on it.
No enert atmosphere tests under argon, or N2 in Harrit’s paper.
“Mohr commissioned EPA scientist James Millette…”
No, Millette was an independent scientist working in a private lab, MVA Scientific Consultants:
http://mvascientificconsultants.com/
This is an accredited laboratory.
It would save time if you were to read the articles and follow the links before making comments. This can be read at the link from Millette’s name above:
“Previous work by Dr. Millette includes 11 years as a research scientist at the U.S. Environmental Protection Agency Research Center in Cincinnati, Ohio…”
The article above also makes clear Millette was involved in work done for the EPA on the WTC dust. This work later became the subject of allegations of fraud, unrelated to 9/11 truth.
Do NOT post uninformed claims that you would know are bogus of you only bothered to read first.
You are implying that Millette worked for the EPA at the time of this testing.
Who is the “some” who have questioned his impartiality? Presumably not the people who paid Harrit for his tests?
[there is a link provided – do NOT ask for information already given – OffG ed]
Classic smear job, here.
The fact Millette was an EPA scientist who specifically worked for the govt on WTC dust samples should have automatically excluded him as a choice for Mohr’s study, regardless of whether he still worked for the EPA or not. You’re just quibbling for the sake of it. Describing him as “independent” is frankly deceptive to the point of overt lie.
Mohr isn’t a government agent. He ended up choosing MVA by default, because he could not find other suitably qualified labs. It shouldn’t surprise you that most researchers in technical areas end up doing government work at some point. The international system of top-level laboratories are all government ‘owned’ (typically with mechanisms in place to prevent politicians interfering with research). What the ‘truther’ project comes down to is distrust of government. I don’t see a viable way to pursue something like the NIST project, on that scale, without government involvement. No university has the internal resources, and most universities have ties to government in any case. How do you see a resolution to the larger ‘truther’ project? Consider this aspect about ‘thermite’: Harrit and Millette are, essentially, two paid-for reports — so arguably both partisan. (Mohr asserts that he did not supply any expectations of results to MVA. Harrit was… Read more »
Harrit et al weren’t paid to do the research you muppet!
Are you contending that the Hattit et al paper (where “et al” is Jones and a couple of other ‘truthers’) is in some way more independent?
Where did the funding for the Harrit et al paper come from?
On the contrary Harrit was paid from funds from Jones’s non profit Charity, that is where the funding for his research came from private donations well in excess of the 1000 dollars paid to Millet’s.
His legal fees also come from charitable donations.
The question is why they couldn’t do better science with the thousands more dollars from Scholars for truth, than Millete had?
Why Mark Basile refuses to publish or return the 5000$ he has received.
My point was that neither party is somehow ‘morally superior’ to the other.
Harrit was happy to co-author a paper with cranks using funds from donations to pay for the work. Millette undertook paid work for Mohr. Mohr does appear to have been trying to maintain neutrality.
I believe that Millette is more credible, based on the fact that he had an accredited lab that has to work to certain standards. I have no idea what standards Harrit works to, if any. The paper does seem to have been open to fairly significant criticisms, having passed whatever peer review process it was subjected to.
(The fact that the editor of the journal it was published in resigned over this, citing that she was effectively side-stepped, is also not a good sign. http://www.internationalskeptics.com/forums/showthread.php?t=141353 )